tender for construction of rana pooja circle - earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground /road top level in all types soild/saturated soil such as moorum, sand, sandy silt, black cotton soil, kankar, etc (2x3.14x4.6= 28.88) & (2x3.14x2.75=17.27) 3 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size) 4 random rubble masonry with hard stone in foundation and plinth : cement mortar 1:6 (1 cement : 6 coarse sand) 5 cement plaster including t&p scaffolding material and complete labpour cost of water curing racking of joints etc with 20 mm cement plaster of mix 1:6 fine/coarse sand) (2pia rh) 6 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 7 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 8 providing and fixing granite stone slab mirror polished and machineedge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12mm (av.) thick base of cement mortar 1:3 (1 cement : 3coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slabincluding grinding, rubbing and polishing complete.jhunjhunu / jalore (red / chocolate colour) upto to 1500 cm2 tiles 9 providing and fixing stainless steel ( grade 304) railing made ofhollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (wherever required) andfitting the same with necessary stainless steel nuts and boltscomplete, i/c fixing the railing with necessary accessories & stainlesssteel dash fasteners , stainless steel bolts etc., of required size, onthe top of the floor or the side of waist slab with suitablearrangement as per approval of engineer-in-charge, (for paymentpurpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.). 10 supplying, erecting and fixing in position specified precast rccbench made of rcc grade m-30 consisting of 2 nos. “l” shaped base support of thickness 100 mm back height 1000mm, front height450 mm, base width 420mm and 5 nos. rcc planks of size of 1500x100 x 50 mm and 1 nos rcc planks of 150x200x50mmincluding joining all parts with galvanised nuts and bolts of suitablesize. all bolts to be sealed after assembly with nice finish andappearance and level complete in all respect as per direction ofengineer in charge. every bench should have a manufacture‘s logoof appropriate size engraved at suitable place. 11 brick work with fps bricks of class designation 75 in superstructureabove plinth level upto two stories in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand) 12 constructing masonry chamber 120x120x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with c.i. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : with f.p.s. bricks