tender for prepare detail scheme, estimation and design of work for providing drinking water facility to dali bai offtake zone cwtm-1 under the jurisdiction of city div.-iii, jodhpur - topographic survey by taking longitudinal sections at every 10m interval, cross sections at every 5m interval on either side of center line of road including supply of detailed drawings in appropriate scale & size in soft copy & hard copy complete all respect as per direction of engineer and detailed alignment plans with covering all features in a width: 2 upto 10 mtrs. 3 fly levelling for transfer level from gts benchmark to project area by close traverse method for fixing of temporary bench mark as reference. 4 fly levelling from location of temporary bench benchmark along the proposed alignment at minimum 50 m interval & where the abrupt changed of levels including supply of drawing of l-section and levelsin tabular form complete all respect as per direction of engineer. (for disposal point of treated effluent and rising main of pipelineworks etc.) 5 establish bench mark / reference pillar of size 15 cm x 15 cm x 45 cm shall be cast in rcc of grade m-15 with a nail fixed in the centre of the top surface. the reference pillar shall be embedded in concrete up to a depth of 30 cm with cc m10 (5 cm wide all around). the balance 15 cm above ground shall be painted yellow.the spacing shall be 250m 6 provision of preparation of dpr 7 typing in m.s word and printing on a-4 size: single spacing 8 in double spacing 9 tabulation work in ms excel and printing on a-4 size: single spacing 10 in double spacing 11 preparation of auto cad drawing with complete detail (a-3 size) with color printing 12 preparation of auto cad drawing with complete detail (a-2 size) with color printing 13 preparation of estimate with help of bsr etc./general report/technical report/tender document etc and printing on a-4 size paper 14 economical design of distribution network with suitable alternatives. 15 extra printing on auto cad drawing (a-1 color) 16 extra printing on auto cad drawing (a-2 color)