tender for painting of darda jbs under darda gp.apas/01/239/249/0004-1 surface dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (payment will b made on profile measurement before and after the work) (b) (i) with carried earth arranged by the contractor within a radius of 3 kn including cost of carried earth. -stripping off worn out plaster and raking out joints of walls, celings etc. up any height and in any floor including removing rubbish within a lead of 75m as directed. single brick flat soling in foundation & floor of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. cement concrete with graded stone ballast (40 mm size) excluding shuttering in all floor.(a)6:3:1 proportion 250 mm. thick brick work with fly ash bricks set in cement sand mortar (1:6) including raking out joints, curing, scaffolding etc. complete in all respect b) in superstructure ground floor labour for chipping of concrete surface before taking up plastering work. plaster to (wall, floor etc.) with sand and cement morter including rounding off or chamfering corners as directed & racking out joints or roughening of concrete surface including throating, nosing and drip course where necessary. a)with 6:1 cement morter.(20 mm thick plaster. out side.) b) 15mm thick plaster inside c) with 1:4 cement morter.(10 mm thick plaster.) a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: b) on steel or other metal surface: with super gloss (hi-gloss) - )two coats (with any shade except white) external surface (ground floor). (a) one coat. applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete urface) as per manufacturers specification. ground floor: (iii) two coats. applying exterior grade acrylic primer of approved quality and brand on lastered or cencrete surface old or new surface to receive decorative extured (matt finish) or smooth finish acrylic exterior emulsion paint ncluding scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. ) one coat - acrylic distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothning of surface. two coats 7 protective and decorative acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of engineer-in-charge to be applied over acrylic primer as required. the rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer in ground floor: (i) two coats. a) normal acrylic emulsion display board