tender for drain construction work near deen dayal market, pratapgarh - earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt,clay, black cotton soil, kankar, etc. depth upto 1.5 m 4 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40mm nominal size). 5 random rubble masonry with hard stone in foundation and plinth : cement mortar 1:6 (1 cement : 6 coarse sand) 6 providing and laying un-reinforced, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints etc including all material, labour, machinery, lighting, guarding and maintenance of diversion. 7 reinforcement for r.c.c. work at all levels including straightening,cutting, bending, placing in position and binding all complete thermo-mechanically treated bars. 8 cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20mm cement plaster of mix 1:6 (1 cement : 6 fine/ coarse sand) 9 kota stone slab 20 mm to 25 mm thick (semi-polished) area 2001-5000 sqcm 10 providing and fixing stone slab covering of required size over drains including filling of joints with cement sand mortar 1:3 complete as per direction of engineer-in-charge.average thickness 40 to 50 mm 11 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: