tender for electric work , replacement of damage pole , work- 1 ( part-a ) carriage offollowing line materials from orai to site including weiging, measuringloading & unloading at both end and proper stacking at safe place. 2 carriage of st pole 11 / 9 mtr long from orai store to site 3 carriage of pcc pole 9.0 / 8.5 mtr long from orai store to site 4 carriage of dog / rabbit / weasel conductorfrom orai store to site 5 carriageof ab cable 3x120 / 3x95 sqmm from orai store to site 6 carriageof ab cable 3x50 / 1x16 sqmm from orai store to site 7 carriage of other line material top, t-off, x-arm, clamps s / s base earthing rod, stay set complete, pin insulator etc. 8 ( part-b ) erection of the following supports after making of pits as per resspo norms & filling of pits by concrete of ratio 1:4:8 ( cement brick balast & sand ) . fitting of all accessories as cross arm, top channel etc. plinthing of support 300mm above ground level by concrete of ratio 1:4:8 ( cement brick balast & sand ) will be done at the time of erection of pole. painting of st pole structure as per resspo norms also ( all type of nut, bolts & grouting material etc. will be provided by contractor ) . 9 erection of double pole structure on st pole 11 / 9 mtr long complete with bracing 10 erection of single support of st pole 11 / 9 mtr long with all fitting 11 erection of double pole structure on 9 / 8.5 mtr pcc pole with all fitting 12 erection of single pole structure on 9 / 8.5 mtr pcc pole with all fitting 13 replacement of rotten dog / weasel conductor after removing rotten conductor and resagging of line 14 straighting of tilted st / pcc pole after digging of pits and regrouting of poles. 15 erection of new stay with its grouting for straighting ofst / pcc poles 16 tighting of ht / lt line after opening of old binding and rebinding after tightening 17 tighting of ab cable of size 3x120 / 3x95 sqmm after opening old binding and tighting of cable and rebinding 18 replacement of distribution box 19 repairing of rotten st poles after breaking of old plingthing & grouting , welding of 3 angle of size 50x50x5mm at 120 degree angle and re grouting & plingthing of poles 20 trimming of trees near ht / lt lines