tender for atal gyan kendra rohina; 1 laying and jointing pvc pipe. heading 2 breaking cement concrete floor and throwing broken material upto 50 m distance. 3 scraping joints of brick or stone wall upto 20 mm depth and preparing surface for plastering. 4 removing doors, windows, ventilators along with door frame and holding strip 5 pouring cement concrete 1 cement : 2 gravel : 4 stone in agreement ratio of 12 mini nominal measure along with agreement, ramming and tamping etc. 6 applying cement plaster on wall by mixing cement - gravel in 1:6 ratio and scraping joints and applying 20 mm thick plaster along with regular tamping for 14 days. thickness 7 flat or ruled tip on stone or brick work in cement gravel mortar in 1:3 ratio with regular drying for 14 days. 8 laying and supply of rajnagar ii quality marble cutting of marble and laying on 20mm 1:4 mortar mixing edges with white cement grinding minimum 3 times including polishing 9 outer frame of angle iron 40x40x3 mm 22 gauge plain gi supply and fitting of 2 pane sheet door of 25x25x3 mm in angle iron frame with argal sliding bolt, latches and holding strips etc. 10 supply and fitting of 2 pane sheet window of 22 gauge plain sheet in angle iron frame of 25x25x3 mm with 10 mm grill, 3 mm glass and argal sliding bolt, latches and holding strips etc. 11 supply and fitting of 14 mesh, 24 gauge iron mesh in iron window and fitting it with 20 x 3 mm beading and tightening it with screws. 12 providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 kg/sqm) on top of hot bitumen @ 1.7 kg/sqm. (1.40 kg ofvg-40 (30/40 )grade and 0.30 kg/sqm. ofvg-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of engineer-in-charge. 13 whitewash work in 3 layers to give even shade on new work/old work. on old work. 14 applying enamel paint in 3 layers to give even shade to make even surface on new work/old work. on old work. 15 contegency 16 work station table 1050mm*600mm made in 19m hdmr with laminate finish & 1 keyboard 17 visitors chair with cushion seat and back without handle frame in steel pipe 18-20 gej with support with 100 microns poweder coated 18 revolving chair the sheet is made of 1.50+0.1cm think hot pressed plywood upholstered with fabric and oulded polyurethane foam 19 library table 2100mm*900mm*750mm 25mm*25m ms pipe frame with powder coated top with 19 mm waterproof board with laminate finish 20 other table 900mm*600m*750mm ms pipe frame with powder coated top with 19 mm waterproof board with maninate finish 21 book shelves tough powder coated crca sheet construction .five equal compartments stores files and documents.three way locking mechanism with traditional handal door with glass to easy see what is stored inside. sleek knock down design with heavy duty welded legs sophisticated gray shade makes it suitable for e-library .five equal compartments stores files and documents 22 hp all-in-one 12th gen windows 11, intel core i3-23.8 inches (60.5 cm) 8gb ram/512gb ssd/fhd, micro-edge, anti-glare display/wireless keyboard and mouse/intel uhd graphics/win 11/5.37 kg, 24-cb1901in 23 wiring and others fixtures 24 contigency