supply installation testing and commissioning of high pressure booster oxygen compressor supply installation, testing and commissioning of high pressure booster oxygen compressor , sitc of high pressure booster oxygen compressor make: rix industries/ novair france/o.g.s.i. system/ air sep one each at phc’s of khaltse , tangtse and nyoma , sict of high pressure booster oxygen compressor for refilling of various sizes of oxygen cylinders having the followingspecification. oil free high pressure oxygenbooster/compressor for 24/7 operation for medical high pressur cylinder filling. hbp compact mounted to mild steel framebelow specification:- inlet pressure = 2-4.8 bar max workingpressure = 158 bar flow=28-57 lpm motor power=1.5hp, compitible to singlephase 220v/50hz operation = continouscooling =air lubrication= oil freestages = 2 stage inlet gas temperature=- 18 to 38degree c ambient temperature= 0-40 degree c dew point = -46degree cinstallation= indoors with auto cutt off valve to cut the supply from hpb ar desired pressure of 140bar pressure gauges = visible on top for both incomming and out going pressure with all the interconneting piping from oxygen concentrator with easy sytem to connect to oxygen manifold 2 x 5 cylinders with nrvs, tail pipesand middle frame oxygen manifold:middle framess 5+5 cylinder oxygen manifold should be suitable to withstand a pressure of 145 kg/cm2, along with high-pressure copper annealed tail pipes with end brass adapters suitable for oxygen cylinders and manifold. top frame comprising of high pressure copper pipes of size15mm i.d. x 15swg with high pressure brass fittings made of high tensile brass and connections through non- return valves,and pressure gauge to monitor the cylinder pressure, high pressure copper tail pipes, made of high pressure copper pipe of size 1/4” i.d. x 15 swg. the manifold should be tested (hydraulically) at 3500 psig and necessary test certificates should accompany along with the supply. only non halogenated polymer materials are used in the non return valves & pressure reducers supplied along with the manifold accessories with each compressor: 204-2v3-maintenance kit for minimum 3000 hrs. 204-2v3-8k maintenance kit for 8000 hrs.