purchase of equipments for geotechnical engineering lab in civil engineering department , purchase of equipmentsfor geotechnical engineering lab , hot air oven (detailedspecification seperatesly attached ) , weighing balance- 20 kg/1gm , weighing balance - 500gm/.01 , moisture cans , spatula , pycnometer for specific gravity , sieves- standard test sieves, 200 mm dia, spun brass frame. 4.75 mm, 2.36 mm, 1.18 mm, 600 mic, 300 mic, 150 mic, 90 mic, lid and pan. , sieves-standard test sieves, 300 mm dia, g.i. sheet frame. 100 mm, 80 mm, 63 mm, 40 mm, 25 mm, 20 mm, 12.5 mm, 6.3 mm, 4.75 mm, lid and pan. , sieve shaker- (detailedspecification seperatesly attached ) , adopter- adopter for 300mm sieves , hydrometer- without chemicals , hydrometer jar-hydrometer glass jar , liquid limit device-(detailedspecification seperatesly attached ) , plastic limit apparatus- (detailedspecification seperatesly attached ) , shrinkage limit apparatus-(detailedspecification seperatesly attached ) , swell pressure test apparatus - (detailedspecification seperatesly attached ) , core cutter- (detailed specification seperatesly attached ) , sand pouring cylinder- ( detailed specification seperateslyattached ) , laboratory permeability apparatusuniversal permeameter (suitable for both falling head and constant head test.) (details of specification seperatesly attached ) , compaction mould -compaction mould 100 mm internal dia x 127.3 mm height, 1000 ml volume complete with collar and base plate, all made of mild steel, tie rods of mild steel and wing nuts for clamping. test is performed as per is: 2720 (part- vii). , compaction mould- compaction mould 150 mm internal dia x 127.3 mm height, 2250 ml volume, complete with collar and base plate all made of mild steel, fixing tie rods of mild steel with wing nuts. test is performed as per is:2720 (part- viii). , compaction rammer, light- (details of specification seperatesly attached ) , compaction rammer, heavy-(details of specification seperatesly attached ) , laboratory cbr apparatus (motorised)- (details of specification seperatesly attached ) , direct shear apparatus (motorised)-(details of specification seperatesly attached ) , unconfined compression apparatus (motorised, supplied complete with proving ring & dial gauge) (details of specification seperatesly attached ) , bench type consolidation apparatus. (details of specification seperatesly attached ) , triaxial test apparatusa) load frame, motorised- quantity-1 b)triaxial cell-quantity-1c)lateral pressure assembly -quantity-1d)self compensating pressure apparatus . -quantity-1 e)proving ring 10kn capacity-quantity-1f)dial gauge (0.01 / 25mm)-quantity-1 (details of specification seperatesly attached )