tender for major repair work gsss sarli - demolishing cement concrete manually/ by mechanical means including disposal of demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge.material within 50 metres lead as per direction of engineer-in-charge.1: 4: 8 or leaner mix. 2 providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =all up to plinth leve 1:4:8 (1cement :4 course sand : 8 graded stone aggregate 40 mm nominal size 3 polished blue kota stoneflooring skirting,laid over20 mm thick base of cement mortar 1:4 and jointed with grey cement slurry to match of the shade of the slab including rubbing and polishing complete for area of each slab from 2001to 5000sq.cm.25mm thick 4 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering -m15 grade nominal mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size). 5 providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 kg/sqm) on top of hot bitumen @ 1.7 kg/sqm. (1.40 kg of vg-40 (30/40 )grade and 0.30 kg/sqm. of vg-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of engineer- in-charge. 6 providing and fixing t-iron frames for doors, windows and ventilators of mild steel tee-sections, joints mitered and welded with 15x3 mm lugs 10 cm. long embedded in cement concrete blocks 15x10x10 cm. of 1:3:6 (1-cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel prime 7 providing and fixing m.s. sheet 1mm thicksingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint.add extra for double leaf shutters. 8 painting with synthetic enamel paint of approved brand and manufacture togive an even shade : two or more coats on new work 9 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: 10 internal finishing: distempering with oil bound washeble distemper of approved brand and manufacture to give an even shade including all scaffolding new work (two or more coats) over and including scrapping and priming coat with cement primer