purchase of equipments for power system lab in eee department purchase of equipments for power system lab in eee department , purchase of equipmentsfor power system lab , ct and pt test setup specifications specifications: current source module: current source transformer current rating 0-20a continuously variable single phase autotransformer for adjusting the current voltage source module:2 amp auto transformer 0-270v. output terminals in front panel. fuse/breaker for protection ct & pt module:15/5 a ct, 270/110v pt digital voltmeter & digital ammeter for measurement make: pragna micro designs , electro mechanical type over current/earth fault relay specifications single pole /element over current relay. ct input: 5a, pms:10% -200% in steps of 25% , tms:0.1 to 1 in steps of 0.1s function: idmt curve of 3sec as per iec-255 ,self-powered, hand reset type with mechanical flag indicator , electro mechanical type over voltagerelay specifications voltage rating :0-400v ac with voltage multiplier plug setting. time multiplier setting (0.1 to 1 in steps of 0.1s) , microprocessor based static over-current relay (non – directional relay) specifications single phase over currentinverse & definite time trip characteristics.built in high set facilitymicro-controller based design. rated current (in):5a rated frequency50hz ± 2.5 hz auxiliary power supply: 95v to 240v ac/dc ± 10% relay settings:10% to 200% of in in steps of 10% time multiplier tms0.1 to 1.6 in steps of 0.1 , microprocessor basedstatic over/under voltage relay specifications single phase over currentinverse & definite time trip characteristics.built in high set facilitymicro-controller based design. rated voltage(vn): 115/230/415 v rated frequency50hz ± 2.5 hz auxiliary power supply: 95v to 240v ac/dc ± 10% pick up voltage settings: over votage mode: 105% to 180% of vn in steps of 5% under voltage mode: 95% to 20% of vn in steps of 5% time multiplier tms0.1 to 1.6 in steps of 0.1 , solid insulation test kit: 30kv specifications insulation break down tester 0-30kv 50ma tranformerinput 220v,output - 30kv,control panel having features of mains on, ht on, ht off, unit ready for zero indicationhigh sensitive tripping device , power factor improvement study kit specifications with capacitorbank 5kvar capacity - with 3hp induction motor with loading arrangement, multi function meter,5 kvar capacitor bank , auto transformer specifications input voltage: 230v, 1 phase, 50 hz out put voltage : 0 - 270 v, 15a , analogue stop watch