supply, installation, testing, trial run and commissioning of 25hp submersible pumpset and 20 hp borewell submersible pumpset at scsf pandalam supply, installation, testing, trial run and commissioning of 25hp submersible pumpset and 20 hp borewell submersible pumpset at scsf pandalam , pumpset at scsf pandalam , supply, installation, testing, trial run and commissioning of 25hp submersible pumpset coupled with electric motor with the specifications listed below:suitable for handling fresh and silty water with rpm 1500 ( syn ) or less. the material of construction of the casing and impeller shall be castiron and shaft in ss of suitable grade. delivery pipe shall be 150mm dia ms of 4.00m. the prime mover for the pump should be 3 phase totally enclosed water cooled motor confirming to is325 / 1978, energy efficient eeff1 / ie2 ratings suitable for 415 v -15, +10%, 50 hz + / - 5% connection with class “f” insulation, 10mm 3 core wire 15m as per site condition, meter board with fuse as per kseb specification and electrical inspectorate norms, prefabricated closed type control panel board completed wired and fitted with fully automatic star delta starter, main switch with isi mark, ammeter, volt meter, selector switch, vss indicating lamps ryb 32x415 v fuse, hrc fuse, elcb, suitable capacitor, spp fuse neutral link, 2 nos. of earth fit suitable for motor as per kseb specification, with all necessary protection units and instrumentation, power module for mobile operation etc complete.the rate inclusive of all the charges of supply, installation including petty civil works, trial run, commissioning, loading, unloading and gst. , supply, installation, testing, trial run and commissioning of 20 hp borewell submersible pumpset coupled with electric motor with the specifications listed below:suitable for handling fresh and silty water with rpm 2800 ( syn ) or less. the material of construction of the casing and impeller shall be castiron and shaft in ss of suitable grade. delivery pipe shall be 65mm dia upvc 20 kg / cm2 of 18m length. the prime mover for the pump should be 3 phase totally enclosed water cooled motor confirming to is325 / 1978, energy efficient eeff1 / ie2 ratings suitable for 415 v -15, +10%, 50 hz + / - 5% connection with class “f” insulation, 10mm 3 core wire 15m as per site condition, meter board with fuse as per kseb specification and electrical inspectorate norms, prefabricated closed type control panel board completed wired and fitted with fully automatic star delta starter, main switch with isi mark, ammeter, volt meter, selector switch, vss indicating lamps ryb 32x415 v fuse, hrc fuse, elcb, suitable capacitor, spp fuse neutral link, 2 nos. of earth fit suitable for motor as per kseb specification, with all necessary protection units and instrumentation, ss rope, pvc fittings, power module for mobile operation etc complete etc. the rate inclusive of all the charges of supply, installation including petty civil works, trial run, commissioning, loading, unloading and gst.