tender for purchase of various type valves (make- kirloskar/crane /venus/sant/kartar/leader) or any approved make by haryana sugarfed or national sugarfed. , c.i. sluice valve with ss spindle and gm nut hydraulic tested at 300 psi, size-2” , c.i. sluice valve with ss spindle and gm nut hydraulic tested at 300 psi, size-2 ½” , c.i. sluice valve with ss spindle and gm nut hydraulic tested at 300 psi, size-3” , c.i. sluice valve with ss spindle and gm nut hydraulic tested at 300 psi, size-4” , c.i. sluice valve with ss spindle and gm nut hydraulic tested at 300 psi, size-5” , c.i. sluice valve with ss spindle and gm nut hydraulic tested at 300 psi, size-6” , c.i. sluice valve with ss spindle and gm nut hydraulic tested at 300 psi, size-8” , c.i. rising spindle valve with ss spindle and g.m. nut testing at 300 psi, size- 5” , c.i. rising spindle valve with ss spindle and g.m. nut testing at 300 psi, size- 6” , c.i. rising spindle valve with ss spindle and g.m. nut testing at 300 psi, size- 8” , c.i. nrv vertical tested at 300 psi size- 3” , c.i. angle valve with ss spindle and gm nut tested at 300 psi, size-2” , c.i. angle valve with ss spindle and gm nut tested at 300 psi, size-3” , c.i. angle valve with ss spindle and gm nut tested at 300 psi, size-4” , g.m. gate valve screw end, tested at 300 psi, make-sant/ leader/ i.s.i mark. size- ½” , g.m. gate valve screw end, tested at 300 psi, make-sant/ leader/ i.s.i mark. size- ¾” , g.m. gate valve screw end, tested at 300 psi, make-sant/ leader/ i.s.i mark. size- 1” , g.m. gate valve screw end, tested at 300 psi, make-sant/ leader/ i.s.i mark. size- 2” , g.m. steam globe valve (isi) screw end. tested at 300 psi, make-sant/ leader/ i.s.i mark. size-1-1/2” , g.m. globe valve flange end tested at 300 psi, make-sant/ leader/ i.s.i mark. size-2” , g.m. gate valve flange end, tested at 300 psi, make-sant/ leader/ i.s.i mark. size- 1” , g.m. gate valve flange end, tested at 300 psi, make-sant/ leader/ i.s.i mark. size- 2” , g.m. gate valve flange end, tested at 300 psi, make-sant/ leader/ i.s.i mark. size- 1-1/2” , c.i rubber diaphramsandrush valve, glass lined, size- 6”.flange to flange distance 415 mm, pcd- 235 mm, no. of holes-08 make- kirlosker/ crane/ venus / state/ national sugarfed approved. , s.s. ball valve ½” (make-kartar or state/ national sugarfed approved ) , s.s. ball valve ¾” (make- kartar or state/ national sugarfed approved) , s.s. ball valve 1” ((make- kartar or state/ national sugarfed approved) , s.s. ball valve 1-1/2” (make- kartar or state/ national sugarfed approved) , s.s. ball valve 2” (make- kartar or state/ national sugarfed approved). , c.s. globe valve 1” class-150 (make-ksb/kirloskar/leader or state/ national sugarfed approved)