11- asphalting work on tilaknagar road - providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. 3 providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 4 providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 5 providing and laying open graded premix carpet 20mm thick (compacted), on prepared surface in a single course as wearing course, composed of specified graded crushed stone aggregate as per table 500-23, premixed with bituminous binder @ 14.60 kg/ 10sqm (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required), including loading of material with f.e. loader, hot mixing of stone aggregate and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting smooth wheeled roller 8-10 tonne capacity and finishing to required level to achieve the desired density as per clause 511 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding cost of tack coat/ seal coat.with bitumen vg-grade 30 6 providing and applying premixed seal coat type b comprising of thin application of fine aggregate 0.06 cum/ 10 sqm premix with bitumen binder @ 6.8 kg/ 10 sqm (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) laying with paver finisher with electronic sensor control and rolling with power roller 8-10 tonne complete as per clause 513 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.with bitumen vg-grade 30