repairs / supply of spares for snow machine no59 ( tata lpt-715 ) , s / c 15, 9010 holland and s / c 23 of mechanical workshop sub division khanabal.-1.02 repairs to wiper machine assembly by way of dismantling the whole assembly from the machine and replaced the worn out parts like rotating arm, carbon brush set etc. the job includes testing of the wiper machine before & after fitment of the machine. the job also includes all leads & lifts. ( s / c 15 ) . 1.03 providing and fitting of side door glass ( right side ) upper & lower 5 mm thick superior quality preferably saintgobin / ashaie of size 3’x2.5’ including providing and fitting of rubber beading. ( s / c 15 ) . 1.04 ms pin 25mm with lock nut. ( s / c 15 ) . 1.05 lamp h3- 12 volt. ( s / c 15 ) . 1.06 providing and fitting of wiper machine assem bly. ( s / c 9010 ) . 1.07 bolt 19mmx04’’ for blade assy. ( s / c 23 ) . 1.08 welding electrode. ( s / c 23 ) . 1.09 repairs to self starter by way of dismantling the whole assembly from the machine and replaced the worn out parts like carbon brushes, spring set, rocker plate cleaning of all the individual parts of the assembly and all the connections from rust & dust, then assembling of all parts of the assembly. the job includes testing of the self starter before & after fitment of the concerned machine. the job also includes all leads & lifts. ( s / m 59 ) . 1.1 fan belt. ( s / m 59 ) . 1.11 pressure pipe 05’ long . ( s / m 59 ) . 1.12 m s angle 50x50x06mmx203mm for reinforcement of cutting edge. ( s / m 59 ) . 1.13 ms plate 04’’x18’’x06mm for reinforcement of blade assembly at different sections. ( s / m 59 ) . 1.14 welding electrode ( adore ) . ( s / m 59 ) . 1.15 drill bit 18mmx203mm. ( s / m 59 ) . 1.16 lpg gas cylinder ( commercial ) 1.17 o2 gas cylinder