tender for 09 - construction of m.r.f stand at dumping ground - earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground /road top level in all types soild/saturated soil such as moorum, sand, sandy silt, black cotton soil, kankar, etc 3 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size) 4 random rubble masonry with hard stone in foundation and plinth : cement mortar 1:6 (1 cement : 6 coarse sand) 5 providing and laying positionspecified grade of rainforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement all work upto plinth leval 1:2:4 (1cement 2coarse sand, 4 graded ston aggregate 20 mm nominal size 6 centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. 7 cement plaster including t&p scaffolding material and complete labpour cost of water curing racking of joints etc with 20 mm cement plaster of mix 1:4 fine/coarse sand) 8 rainforcement for r.c.c work at all levels including straightening cutting, bending, placing in position and binding all complete thermo mechanically treated bars. hot rolled deformed bars. 9 making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 10 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 11 brick work with modular bricks of class designation 75 in foundation and plinth in:cement mortar 1:6 (1 cement : 6 coarse sand). 12 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 13 providing corrugated g.s. sheet roofing including vertical/ curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 14 providing and laying un-reinforced, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed asper approved mix design, laid, spread, compacted and finished in a continuous operation incluing provision of contraction, expansion,construction and longitudinal joints etc including all material, labour, machinery, lighting, guarding and maintenance of diversion. pcc m-20