balance work of public convenience at ramkote ( challan ) ( 3rd call ) balance 1 earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soils. 2 providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with : ( incl; all carriages lead and lifts.) 2.01 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 2.02 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 3 providing & laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete ( incl; all carriages lead and lifts.) 4 centering and shuttering including strutting, propping etc. and removal of form for: foundations, footings, bases of columns etc. for mass concrete. 5 15mm cement plaster on the rough side of single or half brick wall of mix: 13.2.1 1 : 4 ( 1 cement : 4 fine sand) 6 providing and laying exterior vitrified floor tiles 300x300 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1: and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. 11.52.2 size of tile 600x600 mm 7 providing and laying ceramic glazed wall tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. in colour such as white, ivory, grey, fume red brown 8 making plinth protection with common burnt clay bricks of class designation 7.5 laid on edge in cement mortar 1:6 (1 cement : 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75 mm bed of dry brick aggregate 40mm nominal size rammed, consolidated and grouted with fine sand . the top of bricks pointed with cement mortar 1:3 (1cement: 3 fine sand) and curing complete. 9 providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.88.2 2 mm thick. 10 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including priming coat with water thinnable cement primer 11 providing and fixing g.i. pipes complete with g.i. fittings and clamps, including cutting and making good the walls etc. (medium grade by approved manufacture as per instruction of engineer -in-charge.) 11.01 internal work-exposed on wall 15 mm dia. nominal bore 11.02 20 mm dia. nominal bore 11.03 providing and fixing g.i. fitting 11.04 union 15mm 11.05 union 20mm 11.06 ball valve 15mm 11.07 ball valve 20mm 12 providing and fixing pvc pipe line and fitting supreme/prince or equavalent make 4.50 ky pressure including incasing in c.c. 1:3:6 complete job. 12.01 100 mm dia. 12.02 75mm dia. 13 providing and fixing viterous china wash basin with pedistal and cp pillor cock ( cera or equivelent ) complete (white in colour) make and design as per instructions of engineer in charge. 14 making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 15 providing and fixing pvc water storege tank of approved brand & manufacture. 16 providing and fixing 1 h. p. motor for water lifting including all fittings complete . cromptom/usha/sharp or equivlent as per instructions of engineer incharge. 17 taking out mulba, water, slush etc from well incl; cleaning, dismentling of top slab. construction of motor room with m.s. shutters for locking arrangement ( all work as per instructions of engineer-in charge)