supply of light commercial vehicles ( 4 nos ) to karamadai municipality , supply and delivery of 2cum capacity box tipper ( lcv ) including the registration, insurance & tax and providing audio equipments ( amplifier with usb facility, horn speaker ) with necessary wiring, switches for door to door collection of garbage in solid waste as per thefollowing technical specifications.displacement ( cc ) / engine capacity – 700cc – 1250 cc, max power – 20-30bhp @ 2500 rpm and above, max torque – 500nm @ 2000rpm and above, type of fuel – diesel, load capacity – 2cu.m, vehicle emissioin norms – bs – vi, no of cylinder in engine 2-4 cylinder, length of chassis-3800mm-3950mm, width of chassis-1500mm-1550mm. ground clearance. 150mm-165mm, fuel tank capacity-diesel-30 ltrs to 40 ltrs cng-12-25kg, size of tyre’s & no’s-145r 12-5nos, wheel base-1900mm-2250mm, gross vehicle weight-1550kg-1900kg, clutch-single plate dry friction diaphragm, transmission system-manual, no. of speed / forward gears-4nos speeds 94f+1r ) type of steering – manual / power, speed governors-shall be fitted, pay load-800kg to 1000kg, tipper body length-2100mm-2200mm, mild steel, tipper body width-1400mm-1500mm, tipper body height-750mm-950mm, mild steel, side portion ( lh & rh ) & rear door sheet thickness- 2mm mild steel, tipper body top sheet including frame sheet thickness-1.6mm, mild steel, tipper body top lid sheet thickness-, 1.2mm, mild steel, tipper container-tipper container should be fabricated with tow doors on the rear side and four doors on four top corners of the containers with thnges and locking system.a partition should be provided on the middle of container along the vertical length of the body, tipper body top lid main sheet thickness-75x40x6mm, hydraulic system make-reputed make, hydraulic system driven-main engine, painting- should be painted with one coat of anti-corrosive epoxy primer and two coats of enamel paint for approved quality to ensure long lasting resistance for weatherizing and breakage.the color shade should be as per norms, lettering-to be carried out as directed by dept officers, tipper body rear door-shall be with necessary locking facility, side safety guard-shall be provided as per rto requirement, additional conditions-vehicle with fuel sensor and gps tracking, warranty distance / year-25000km / / 12 months whichever is earlierincluding registration fee, road tax and insurance.etc. complete including gst