bids are invited for provision of store for ug fsc total quantity : 1; 1.1 columns. the 20 nos main cloumns will be made out of ismb of size 200x100mm (3.15 mr) weight not less than and will be fixed using ms end plate 250x250x10mm thick at top and 4 nos 12mm dia, 50mm length nut & bolts at top level. the column shall be welded with 300x300x10mm thick ms plate at bottom and shall be fixed to the foundation with 4 nos bolts 16mm dia 450mm long through this plate over 450mm pcc 1:2:4 coloumn. make: tata/sail/jindal or isi marked nos 20 1.2 truss. 06 nos of truss shall be made of ismb section of size (7.90 mtr) 200x100mm. the trusses are provided at a distance of 1.2m c/c and shall be supported on suitable columns. two nos ms plate of size 250x250x10mm thick should be welded to each truss to tie with top plate of the columns. suitable arrangement of 150x150x8mm thick cleats with nos 04 drilled holes of dia 12mm for fixing purlins. as per sketch p. make: tata/ sail /jindal or isi marked nos 6 1.3 purlin. the purlins will be fabricated out of ismb steel sections of size (7.90 mtr) 100x70mm with 150x150x8mm thick cleats welded at both the ends with 04 nos drilled holes of dia 12mm with 04 nos 12mm dia 40mm length suitable nut and bolts for fastening. as per sketch make: tata/sail/jindal or isi marked nos 6 1.4 shs 50x50x5mm for wall runner 6.1 mtrs weight not lees than 6.02 kg/m nos 12 1.5 5mm steel chequred plates for roof sqm 62.5 1.6 2 mm thick black plain sheet for wall sqm 74.5 1.7 ms plates top 300x300x10mm for fdn nos 20 1.8 ms plates top 250x250x10mm for fdn nos 20 1.9 ms plates of size 150x150x8mm for purlin, rafter & truss 150x150x8mm nos 144 1.10 suitable size nut and bolts for ms plate of size 150x150x8mm for purlin, rafter & truss nos 636 1.11 fdn nut and bolts 16mm dia 450mm long nos 80 1.12 suitable size nut & bolts for ms plate of size 250x250x10mm nos 80 1.13 framed work for rain shed, post , purline, rafter, etc conforming to fe.290.gde-e-165 square hollow pipe 50x50x3mm thick weight not less than 4.50 kg/m , door frame- 45x45x5 including painting complete all as specifed . rm 29.00 1.14 3 mm thick plain sheet for door includings all fittings complete with painting all as specifed and as directied. sqm 1.80 1.15 pre-painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.63mm thick of olive green colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. sqm 12.00 1.16 ppgi roof sheet for entrance 0.63mm as per sketch s. sqm 8 1.17 hdpe/pp og color woven sand bag of size 830mm x 350mm with rope. nos 780 1.18 hdpe sheet og colored 300 gsm over app based polymeric membrane minimum weighing 3kg/sqm and sqm 62.41 minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced appplication. 1.19 ordinary portland cement grade 43, is-12269-1990, packed in 50 kgs hdpe bags conforming to isi 1652/2000. make : acc/amuja/birla/ultra tech bag 152.18 1.20 river sand: sand shall be clean, sharp, angular hard and durable free from adherent coating and shall not contain clay, mica and other impurities. the maximum quantities of clay and fine silt in sand shall not be more than 5% by mass as per is-383-1970. cum 27.50 1.21 40mm stone aggregates stone aggregate shall be crushed stone 40mm graded conforming to is-383 -1970 and shall be clean hard tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities. cum 11.00 1.22 20mm stone aggregates stone aggregate shall be crushed stone 20mm graded conforming to is-383 -1970 and shall be clean hard tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities. cum 3.00 1.23 63mm stone aggregates stone aggregate shall be crushed stone 63mm graded conforming to is-383 -1970 and shall be clean hard tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities. cum 55.00 1.24 common building brick sub class b of size 23cm x 11.5cm conforming to is 1077-1986. average compressive strength not less than 15n/mm2. nos 500.00 1.25 protable, collapsible protective wall baskets (hesco basket), galvanized welded mesh frame (2 cells per set) 4mm dia of size length 4.0 feet, width 2.0 feet and ht 4.0 feet as per drawing attached to be filled bypcc 1:5:10. the cage box have innerlining of non-woven geotextile khaki colour. the geo textile will be 2.5 mm thick 250 gsm in heavy duty non-woven polypropylene. make-confirming to is code 13162 (1992) nos 45 1.26 aluminium ventilator 450x350mm nos 4 1.27 40mm thick cement panel board for wall panneling 10ftx3ft nos 42 1.28 vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over 15mm thick screed bed set and jointed in neat cement slurry and pointed in white or coloured cement to match make: kajaria/somany /jhonson sqm 40 1.29 pvc sheathead copper cable 1.5 sqmm single core with multistrand 1100 volts grade as per is 1554 make: anchor /plaza/havells roll 4.00 1.30 casing capping ¾” length 10’ size make: ajantaplast/ anchor/havells nos 72.00 1.31 pvc tee 3/4 make: ajantaplast/ anchor/havells nos 20.00 1.32 pvc cashing caping coupler of size 3/4 make: ajantaplast/ anchor/havells nos 44.00 1.33 ceiling rose pvc. make: anchor/plaza/havells nos 16.00 1.34 switch piano moduler type 10 amp one way. make: anchor/ plaza/havells nos 22.00 1.35 switch piano moduler type 20 amp one way. make: anchor /plaza/havells nos 8.00 1.36 socket 10 a modular type. make: anchor/plaza/havells nos 8.00 1.37 socket multipurpose 3 pin 10 and 3 pin 20 amp modular type of 2 module. make: anchor/plaza/havells nos 8.00 1.38 pvc elbow 3/4 for casing caping make: ajantaplast/ anchor/ havells nos 32.00 1.39 tape insulation 10 mtr. make: anchor/plaza/havells roll 4.00 1.40 solid plate with base frame suitable for surface plastic box of 4 module make: anchor/plaza//havells nos 4.00 1.41 solid plate with base frame suitable for surface plastic box of 3 module.make: anchor/plaza/havells nos 14.00 1.42 pvc square block.make: ajantaplast/ anchor/havells nos 40.00 1.43 mcb db spn 8 ways double door 240 v with bus bar as per is 8628 . make: anchor/plaza/havells nos 2.00 1.44 mcb 20 amps sp,240 v. as per is 8623 make: anchor /plaza/havells nos 4.00 1.45 mcb 10 amps single pole 240 v as per is 8628. make: anchor /plaza/havells nos 4.00 1.46 isolator 40 amp dp 240 volts make: anchor/plaza/havells nos 2.00 1.47 pvc copper cable pvc 2.5 sqmm s/c multistrand as per is 694 make: anchor/plaza/havells roll 2.00 1.48 steel screw full threaded 1 /2 best quality isi marked(100 nos) pkt 2.00 1.49 steel screw full threaded screw 1 isi marked(100 nos) pkt 4.00 1.50 led tube light fitting 20 watt, ultra bright glass shell, glare fee, wide angle, double side connection retofit led tube g 13 lamp holder complete with fixing accessories. make : bajaj/philips/havells nos 8 1.51 led 9w with holder. make : bajaj/philips/havells nos 8 1.52 wall mounted fan complete with electronic regulator and accessories 230v 300mm sweep with wire hook. make : usha/havells/bajaj. nos 4 1.53 changeover switch indoor 220/240v make: bajaj/havels/ philips nos 1 1.54 15 amp switch socket combination 240 volt along with gang box. make : anchor/havells/bajaj. nos 4 1.55 20 amp switch socket combination 240 volt along with gang box. make : anchor/havells/bajaj. nos 2