tender enquiry for supply of expendable medical store of echs preregistration with 172 mh is mandatory to participate in the tender , medicines : , i-stat-i auto blood gas analyzer bbqr of i-stat i blood gas analyzerportable handheld blood analyzer for analysis of blood gas, electrolyte, chemistry, cardiac and coagulation markers using single use disposable cartridges.• analyzer should measure ph, pco2, po2, tco2, na+, k+, cl, ionizedcalcium, lactate, hematocrit, glucose, urea, creatinine, troponin-i, ck-mb, bnp,pt/inr, act on a single device with options to choose different cartridges.• analyzer must display calculated parameters including hco3, base excess, so2,anion gap & hemoglobin.• analyzer should be small, handheld, light weight (below 1 kg), and portable – suitable for use at point of care/patient bedside• system must be capable of using blood samples typically less than100ul depending on cartridge type.• system should be battery operated using power source rechargeable batteries. battery backup should be provided though rechargeable battery for minimum 30 mins.• system must be provided with external thermal portable printer for wireless printing.• system must have capability to transmit the patient results to hospital lis or his• the analyzer must be usfda and iso certified. copies of reports and certifications should be furnished to buyer on demand at time of supplies• cartridge / reagent before use can be stored mostly at room temperature between 2-30 degree c, and should have automatic calibration.• type of technology should be single use cartridges• system should have lcd monitor to display the results.• system should have patient bar code facility and ability to run a wide range of patient panels on one system.• shelf life of the reagent / cartridges should be 6 months, on-board shelf life of reagent should be minimum 24 weeks.• warranty should be 5 years (including electrode and membrane etc as applicable for the analyser offered) • user/technical/maintenance manuals should be supplied in original in english in hard and soft copy• the principal manufacturer must have direct presence or approved service center in india• demonstration of equipment and training to be provided after completing supplies before acceptance => limited