procurement of consumables - hand surgery and miscellaneous trauma items for orthopedic department , k nail sizes 8-14mm, length 32-44mm , radius intramedullary nails 2-4mm diameter22-32cm length , ulna intramedullary nails 2-4mm diameter22-32cm length , 3.5mm reconstruction plates 5-12 holes with seven 3.5mm screws , 3.5mm low contact dcp 6-12 holes with seven 3.5mm cortical screws ( 12 to 24 mm ) , 3.5mm locking compression plate 6-12 holes with six locking screws and two non locking screws ( 12 to 24 mm ) ( stainless steel ) , 1 / 3 tubular plates 6-8 holes with six 3.5mm cortical screws ( 12 to 24 mm ) ( stainless steel ) , 4.5 mm narrow dcp, low contact, 7-12 holes with seven 4.5mm ( 14 to 28mm length ) ( stainless steel ) , narrow low contact locking compression plate 6-12 holes with six locking screws and two non locking screws ( stainless steel ) ( 14-28mm ) , 4.5 mm broad low contact locking compression plate, 6-18 holes with seven 4.5mm screws ( 14-28mm ) ( stainless steel ) , 2.7mm sfs dcp, 5 to 8 holes with six 2.7mm screws ( length 10-20mm ) , 4.0 mm cannulated cancellous screw, partially threaded with guide wire and washer, length 30-60mm, various thread lengths , 6.5mm partially threaded cancellous screw with washer ( length 35-110mm, thread length 12mm / 16mm / 32mm ) , 7.0mm cannulated cancellous screw, partially threaded with guided wire and washer ( length 65 to 110mm, thread lengths 12mm / 16mm / 32mm ) , proximal tibial lateral anatomical locking plate 5 to 7 holes with seven 4.5mm locking screws and two 4.5mm cortical screws ( stainless steel ) . , proximal tibial lateral anatomical locking plate 5 to 7 holes with seven 3.5mm locking screws and two 3.5mm cortical screws; should have atleast 4 screws in periarticular region ( titanium ) . , proximal tibial medial anatomical locking plate 5 to 7 holes with seven 3.5mm locking screws and two 3.5mm cortical screws, atleast 3 screws in periaticular region ( titanium ) . , proximal tibial posteromedial anatomical locking plate 5 to 7 holes with five 3.5mm locking screws and two cortical screws ( titanium ) . , distal tibial medial anatomical locking plate 5 to 7 holes with 7 locking screws and two cortical screws ( stainless steel ) , distal femuranatomical locking plate, 6 to 12 holes on the shaft, with 8 holes screws and for 4.5mm cortical screws ( stainless steel ) . , proximal humerus anatomical locking plate ( phlos type ) 5 to 7 holes on the shaft with 7 locking screws and two 3.5mm cortical screws ( titanium ) . , distal humerus anatomical locking plate set ( two plates- one medial and one lateral, with 6 locking screws and 6 cortical screws ) , 4 to 8 holes on the shaft of the plate ( stainless steel ) , distal humerus anatomical metaphyseal locking plate suitable for fixation of metaphyseal fractures of the distal humerus with 6 locking screws and 6 cortical screws, 6 to 14 holes ( stainless steel ) , proximal ulna anatomical locking plate suitable for fixation of proximal ulna fractures with 6 locking screws and 6 cortical screws, 4 to 8 screws on the shaft ( stainless steel ) , anatomical locking plate for distal fibula 4.8 hole with six locking and 2 cortical screws ( stainless steel ) , anatomical locking lateral end clavicle plate with 2.7 and 3.5mm locking screws.set comprising of one plate, four 2.7 and three 3.5mm locking screws , titanium proximal medial tibial osteotomy locking plate for hto with hydroxyapatite / tcp wedges 7-15mm sizes , anatomical locking plate for clavicle mild shaft fractures.one set comprising of one plate and six 3.5mm locking screws , eight plate for pediatricphyseal growth modulation with a pair of cannulated fully threaded cancellous screw, titanium make , anatomical locking lateral end clavicle plate with 2.7and 3.5mm locking screws.set comprising of one plate, four 2.7 and three 3.5mm locking screws , coventary staples titanium / u staple, misc. sizes , proximal femoral nail- 34 to 44 cm length, 9 to 12 mm diameter, with two proximal and two distal locking bolts. ( instrumentation to be provided free of charges during the surgery ) . , proximal femoral nail with single screw / blade / functional single screw to provide rotational stability to the neck.sizes: small to long ( one set comprises of one nail plus functional screw / blade, end cap and two distal locking bolts ) . , interlocking nails for femur with 2 proximal and 2 distal locking screws ( nail diameter 9-12mm, length 36-44mm ) , interlocking nails for tibia with 2 proximal and 2 distal locking screws ( nail diameter 8-10mm, length 26-34mm ) , tibia nail ( expert type ) for proximal and distal metaphyseal fractures with 6 locking bolts, misc sizes ( titanium ) , interlocking nails for humerus with provision for minimum 3 proximal and 2 distal locking screws ( nail diameter 6-8mm, length 22-30mm ) , distal femoral nail with two proximal and three distal locking screws, anteroposterior curve to accommodate the curve of femur ( nail diameter 9-12mm, length option in increment of 2cm from approx. 26cm-38cm ) , proximal locking option preferably in antero-posterior direction , reconstruction nail for femur with provision of trochanteric entry point, diameter 9-12mm and 36-44mm length with four bolts of assorted size , dhs set consisting of one richard screw ( 65-110mm ) , one compression screw, one short / long barrel plate ( 4-8 holes ) & 4 cortical screws, misc. sizes , dcs set consisting of one richard screw, one compression screw, one plate ( 4-8 holes ) and five 4.5mm cortical screws, one 6.5mm cancellous screw , dcs set consisting of one richard screw, one compression screw, one plate ( 9-14 holes ) and six 4.5mm cortical screws, one 6.5mm cancellous screw , distal femur osteotomy plate with 8 locking screws , distal tibia anterolateral plate with 8 locking screws 3.5mm screws , distal femur medial plate with 7 locking screws , calcaneal locking plate with eight 3.5mm locking screws , cable system with crimp for encirclage in peri-prosthetic fractures ( usfda*only ) , locking paediatric hip plate 3.5mm and 5mm with anglulation option of 100 / 110 / 120 / 130 / 140 / 150 with 7 screws , recon plate for pelvis fracture- 9 holes to 18 hole with 7 screw , ankle arthrodesis nail - for tibio-talo calcaneal fusion with 5 locking screws , knee arthodesis interlocking nail with 4 locking bolts , pediatric expendable nail ( telescopic nail- fassier duval type ) , locking plate for peri-prosthetic proximal femur fracture with 8 screws and 2 cable ties , ring fixator set- one set consists of 10 half rings of aluminum rings ( 120-220mm ) eight 1.8mm thickness wires ( buyonat and trochar tip ) , eight 1.8 mm thickness olive wires ( buyonat and trochar tip ) , 16 rods, 6 male posts, 10 flat washer and 16 conical washers , ring fixator set- one set consists of 4 half rings of aluminum rings ( 120-220mm ) , one italian archwith 2 oblique supports, five 1.8 mm thickness olive wires ( buyonat and trochar tip ) , 12 rods, 4 male posts, 5 rancho cubes and 5 tapered half pins , hydroxyapatite coated tapered half pins 5mm to 6mm tapering , software guided hexapod fixator for 6 axis correction for use along with illizarov ring fixator , schanz screw 2.5 / 3.0 mm , schanz screw 3.5 / 4.5 mm ( thread sizes 12 / 18 mm ) , schanz screw5.0 / 5.5 mm ( cortical ) ( thread size 12 / 18 / 32 mm ) , schanz screw5.0 / 5.5 mm ( cancellous ) ( thread size 12 / 18 / 32 mm ) , denhams pin 4.5 / 5.0 mm ( core diameter at the threaded portion ) , steinman pin 3.0 / 3.5 mm , steinman pin 4.5 / 5.0 mm , universal external fixator clamp , tube to tube clamps , tubular rods -4, 6, 8 , tubular rods -10, 12, 14 , forearm fixator clamps for 2.5mm pins , forearm fixator clamps for 3.5mm pins , forearm fixator connecting rods - all sizes , spanners ( size 6 / 7 ) , spanners ( size 8 / 9 ) , spanners ( size 10 / 11 ) , ring fixator set: one set consists of eight half rings stainless steel ( 120 to 220 mm ) , eight 1.8 mm k wires ( bayonet and trocar tip ) , 12 threaded rods ( 4 to 10 ) , 16 slotted nuts ( centric / accentric / schanz screw holding ) , 8 ring connecting bolts, 4 washers, 80 nuts, 2 spanners size 10. , ring fixator set: one set consists of eight carbon fiber half rings ( 120 to 220 mm ) , eight 1.8 mm k wires ( bayonet and trocar tip ) , 12 threaded rods ( 4 to 10 ) , 16 slotted nuts ( centric / accentric / schanz screw holding ) , 8 ring connecting bolts, 20 washers, 80 nuts, 2 spanners size 10 , k wires 1.8mm for illizarov , threaded rods - 4, 6 , threaded rods -8, 10 , threaded rods -12 , twisted plate ( misc sizes ) , straight plate ( misc sizes ) , male posts ( 1 to 5 hole ) , male posts ( 6 to 10 hole ) , female posts ( 1 to 5 hole ) , female posts ( 6 to 10 hole ) , hexagonal socket ( misc length ) , telescopic rods , concavo- convex washers , hinges for illizarov ring , distracter- small, with 4 schanz screws, 1.5 / 2.5 mm, with one allen key. unilateral distracter with clamps for two pins proximal and two distal, suitable for application on fingers , distracter- medium, with 4 schanz screws, 2.5 / 3.5 mm, with one allen key. unilateral distracter with clamps for two pins proximal and two distal, suitable for application on wrist , distracter- large, with 4 schanz screws, 3.5 mm, with one allen key. unilateral distracter with clamps for two pins proximal and two distal, suitable for application on forearm and ankle , mono-axial external fixation device set with provision of bone transport. one set comprising of one mono rail, three clamps ( central clamp / end clamp / swivel clamp ) , two compression distraction unit ( misc sizes ) , allen key, six tapered schanz screws, 6.0 to 6.5 mm diameter , herbert type cannulated screws ( titanium ) with two guided wires, diameter 2.4 mm, length 9 to 30 mm ( usfda* only ) , herbert type cannulated screws ( titanium ) with two guide wires, diameter 3.0 mm, length 9 to 30 mm ( usfda* only ) , herbert type cannulated screws ( titanium ) with two guided wires, diameter 3.5mm, 12 to 30 mm lengths , herbert type cannulated screws ( titanium ) with two guided wires, diameter 4.5mm, misc length , mini fragment plates ( 1.5 / 2.0 / 2.4 mm ) , locking ( all sizes, different shapes ) and corresponding screws ( screw heads low profile ) , titanium, star head ( usfda* only ) , tap 2.7mm , tap 3.5mm , tap 4.5mm , drill bits 2.5mm , drill bits 3.2mm ( different lengths ) , drill bits 4.5mm , crutchfield tongs for skull traction ( all sizes ) with one guarded drill bit , distal radius volar anatomical locking plates 2.4 / 2.7 mm, 4 to 8 holes on the shaft with 5 locking screws and 2 cortical screws ( star headed screws ) , distal radius dorsal anatomical locking plates 2.4 / 2.7 mm, t and l shape, 4 to 6 holes with 4 locking screws and 2 cortical screws ( star headed screws ) , radial styloid anatomical locking plates 2.4 / 2.7 mm, 4 to 6 holes with 4 locking screws and 2 cortical screws ( star headed screws ) , proximal radius anatomical locking plates for fixation of radial head and neck fractures, 2.4 / 2.7 mm, 4 to 6 holes with 4 locking screws and 2 cortical screws ( star headed screws ) , anatomical locking plate for wrist arthrodesis, suitable for fixation of wrist arthrodesis with or without proximal row carpectomy, 2.4 / 2.7 mm distal screw size. with 3 proximal and 3 distal screws , 1.5 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head ( usfda* only ) , 2.0 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head ( usfda* only ) , 2.4 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head ( usfda* only ) , titanium elastic nail 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / 4.0 mm , pelvic c clamp complete , radial head prosthesis ( metallic / noncemented ) , pmma bone cement low viscosity 20 gm ( usfda* only ) , pmma bone cement low viscosity 40 gm ( usfda* only ) , pmma bone cement with antibiotics 20gm ( usfda* only ) , pmma bone cement with antibiotics 40gm ( usfda* only ) , disposable gamma irradiated gown set - each containing 5 gowns, 4 large drapes and stockinette each , disposable gamma irradiated , impervious kit of drapes for hip and knee surgery ( replacement ) containing ( sterile stockinette, o drapes / u drape, screen cover, polydrape sheet, drape sheet 1 x 1metre ) , adjustable hard cervical collar , kramer wire splints ( misc sizes ) , synthetic plaster cast bandages 3 / 4 , synthetic plaster cast bandages6 , stockinette for upper limb , stockinette for lower limb , esmarch bandage 4 , esmarch bandage6 , foam skin traction kit with crepe bandage and nylon rope , head halter traction kit ( including spreader and nylon rope ) , kirschner wires 0.9 / 1.0 mm, diameter, 4 length, both ends sharp , kirschner wires1.2mm, diameter, 6 length, both ends sharp , kirschner wires1.5mm, diameter, 6 length, both ends sharp , kirschner wires 2mm, diameter, 6 length, both ends sharp , kirschner wires 2.5mm, diameter, 6 / 9 length, both ends sharp , kirschner wires, 3mm diameter, 6 / 9 length, both ends sharp , spool of stainless steel malleable wire 16 to 22 g , bone wax , gigli saw wire , gentamicin impregnated sterilized cement beads ( chain of 10 beads ) , gentamicin impregnated sterilized cement beads ( chain of 30 beads ) , non-absorbable, sterile surgical suture composed of polypropylene, pigment to enhance visibility. 8-0. round body needle , non-absorbable, braided, coated, sterile, surgical suture composed of poly ( ethylene terephthalate ) .no.2 , non-absorbable, braided, coated, sterile, surgical suture composed of poly ( ethylene terephthalate ) . no.5 , sterile disposable covers for image intensifier , normal saline bottles for arthroscopy ( 3l ) , cautery leads with tips for cutting and coagulation ( compatible with covidien ) , sterile cling drape , betadine impregnated sticking drape for orthopedicimplant surgery ( medium size ) , betadine impregnated sticking drape for orthopedicimplant surgery ( large size ) , orthopedic gloves with following specifications- at-least 0.330mm thick for increased protection, textured surface for better grip, ease of donning, dull colour to reduce glare, great flexibility and elasticity, latex, powder free polymer coated inner surface , disposable impervious surgical gowns with back flap completely covering the back of the surgeon ( mediumsize ) , disposable impervious surgical gowns with back flap completely covering the back of the surgeon ( large size ) , disposable impervious surgical gowns with back flap completely covering the back of the surgeon ( extra large size ) , sterile turp set ( irrigation set used during arthroscopy ) , sterile camera cover , fibre wire suture no 2 , fibre wire suture no 5 , silicon rods ( size 4 and 5 mm ) for two stage flexor tendon reconstruction. , constrained silicon elastomer joint replacement device for mcp joint , constrained silicon elastomer joint replacement device for pip joint