supply of set of gauges for checking cbc, knuckle and other part to tightlock coupler h-type to rdso spec. no. rdso.2011/cg-03 of october 2011.one set consisting of 06 gauge & reference as per apta drawing type of gauge as follows:- (1) contour maintenance gauge (knuckle profile gauge), apta ref. drg. no.31000- 1 no./set (2) alignment wing limit gauge , apta ref. drg. no. 32600- 1 no./ set (3) counter condemning limit gauge , apta ref drg. no.34100-1- 1 no./set.[4] vertical height alignment wing pocket and guard arm gauge (go gauge), apta ref. drg. no.34101-4- 1 no./set.[5] knuckle nose wear and stretch limit gauge ,apta ref. drg. no.34100-2a- 1 no./set. (6) vertical height alignment wing pocket and guard arm gauge (no go gauge), apta ref. drg. no.44250 -5 - 1 no./set. make: pie or ganapathy industries or jyothi only.set of gauges for checking cbc, knuckle and other part to tightlock coupler h-type to rdso spec. no. rdso.2011/cg-03 of october 2011.one set consisting of 06 gauge & reference as per apta drawing type of gauge as follows:- (1) contour maintenance gauge (knuckle profile gauge), apta ref. drg. no.31000- 1 no./set (2) alignment wing limit gauge , apta ref. drg. no. 32600- 1 no./ set (3) counter condemning limit gauge , apta ref drg. no.34100-1- 1 no./set.[4] vertical height alignment wing pocket and guard arm gauge (go gauge), apta ref. drg. no.34101-4- 1 no./set.[5] knuckle nose wear and stretch limit gauge ,apta ref. drg. no.34100-2a- 1 no./set. (6) vertical height alignment wing pocket and guard arm gauge (no go gauge), apta ref. drg. no.44250 -5 - 1 no./set. make: pie or ganapathy industries or jyothi only.,set of gauges for checking cbc, knuckle and other part to tightlock coupler h-type to rdso spec. no. rdso.2011/cg-03 of october 2011.one s et consisting of 06 gauge & reference as per apta drawing type of gauge as follows:- (1) contour maintenance gauge (knuckle profile gauge), apta ref. drg. no.31000- 1 no./set (2) alignment wing limit gauge , apta