purchase of pump, valve and s.s sleeves etc. purchase of pump, valve and s.s sleeves etc. , electrical goods , motorised hydraulic pump complete with motor, starter cable, pressure gauge etc. having following specification: size 1”x1”, cap.= 1430 ltr. / hr., head-150 mtr., working pressure- 15 kg / cm2, motor hp- 2.5, rpm-1440 , magma pump with rectangular 9” size suction and circular discharge flange pcd-320, c.i. rotor with g.m. strip , feed pump c.i. coupling ( bush type ) od-228mm, id=135mm, bush hole=40mm & 14mm with bush & pin total hole=11 , s.s. impeller for pump model no. shd 150 / 32n ( one side open ) , fabricated impeller from m.s. plate 8mm thick ( one side open ) for pump model no. shd 150 / 32n , s.s. sleeve grade-304 as per drawing size 55odx38idx15.7 length , do-50x32x10.5 length , do-50x32x10.8 length , s.s. hallow grade-304 35mmidx60mmodx170mm length , do- 30mmx50mmx125mm length , m.s. fabricated rubber seated angle valve 600mm with s.s. spindle & seat, rubber seat nuprine rubber seat thickness 1” suitable for 150 deg.c. ( puri make ) , full gear coupling gc-106 with adaptor plate , full gear coupling gc-103, od-220mm with adaptor , gear box for l.t. drive hb-350, ratio 40.17:1 , input pinion for gear box hb-350, ratio 40.17:1 ( l.t. drive ) , supply, dismantling & fitting of vacuum filter scrapperfilter size 8’x16’ , clit , cheron box m-shape strip ( ss-304 ) as per sample , cheron box s.s.-304 wirenetting as per sample.