supply of spares for amateep make and impact make machines , oil seal 70 x 90 x10 for model pnc 12.5 -oa 200-06-606 , single disc clutch and brake assembly for machine model- pnc 12.5 - o / a no. 200-06-606, ( photo enclosed ) , connecting rod front- slide to rocker arm- for machine model- pnc 12.5 - o / a no. 200-06-606, ( photo enclosed ) 3pn-125606a , ball screw ( connecting front connecting rod to the slide ) for model pnc 12.5 -oa 200-06-606 ( photo enclosed ) - 3pn-125024 , set of flywheel bearings: ( each set consist of 1 no. 6211 and 1 no. nu-211 bearing ) for model pnc12.5 -oa 200 / 06 / 606 ( photo enclosed ) , bevel gear for machine model pnc12.5 oa- 200-06-606 ( photo enclosed ) -3pn-008343a , bevel gear ( crank shaft ) for machine model pnc12.5 oa- 200-06-606 ( photo enclosed ) -3pn-008344a , cam box assembly fitted with 03 nos. proximity switches, complete with: a ) htd belt 720-8m-20 - 1 no.b ) htd driven pulley 30-8m-20f with flange - 2 nos. for model pnc12.5 -o / a 200 / 06 / 606 ( photo enclosed ) , flat belt ntb extremultus lg-20 -2110 x30 endless for model pnc 12.5 -o / a 200 / 06 / 606 ( photo enclosed ) , seal kit for clutch & brake assembly consisitng of-piston seal- outer & inner dia, o-rings, end seals etc. for machine model- pnc 12.5 - o / a no. 200-09-703 , clutch lining, part no. m200 ( 0-400-127-61-330 ) for machine model- pnc 12.5 - o / a no. 200-09-703 , connecting rod ( rear ) , jointless matl c-45, centre to centre distance- 1485mm, total length-1670mm for machine model- pnc 12.5 - o / a no. 200-09-703, p ( photo enclosed ) 3pn - 125786a , center pin / cam pin ( skip notching rocker arm centre pin ) for machine model pnc12.5 oa- 200-09-703 ( refer photo ) 3pn 125543d , rocker arm for machine model pnc12.5 o / a- 200-92-878 ( photo enclosed ) 2pn-125239a , main gear z4 for indexing for machine model pnc12.5 oa- 200-09-703 ( refer photo ) i 3pn 125006.1 , idler spindle z3 for indexing for machine model pnc12.5 oa- 200-09-703 3pn 125583a , ball ( adjusting ) screw ( connecting front connecting rod to the slide ) machine model- pnc 12.5 - o / a no. 200-92-878 ( photo enclosed ) 3pn 125024 , connecting rod-rear , for machine model- pnc 12.5 - o / a no. 200-92-878 ( photo enclosed ) 3pn-125470d , main gear z4 for indexing for machine model pnc12.5 o / a no. 200-92-878 ( photo enclosed ) 3pn-125006.1 , idler spindle z3 for indexing for machine model pnc12.5 oa- 200-09-878 3pn 125385.2 , crank shaft for machine model pnc12.5o / a no. 200-92-878 ( photo enclosed ) 3pn 125335.1 , connecting rod front- slide to rocker arm- model pnc12.5 oa- 200-92-878 ( photo enclosed ) 3pn 125354.1