tender for creation of sps record room-2 demolishing mud phaska in terracing and disposal of material within 50 meter lead. 3 brickwork with common burnt clay bricks of class designation 7.5 in superstructure above plinth level 4 steel reinforcement for r.c.c. work including cutting, bending, placing in positiion and binding all complete upto plinth level of grade fe-500d. 5 r.c.c. work in beams, suspended floors, roofs including the cost of shuttering , centring, and reinforcement with 1:1.5:3 6 providing and laying of 15mm thick plaster of mix 1:6 ( 1 cement: 6 fine sand ) as per the direction of site incharge. 7 providing and laying of 12mm thick plaster of mix 1:6 ( 1 cement: 6 fine sand ) as per the direction of site incharge. 8 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p.brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. ( glazing, paneling and dash fasteners to be paid for separately ) powder coated aluminium ( minimum thickness of powder coating 50 micron ) 9 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 10 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :new work ( two or more coats ) over and including water thinnable priming coat with cement primer 11 supply and fixing of following sizes heavy duty conduit pvc castingand capping / conduit / on surface including all acesserios t-point internal and external includingall:25mm 12 providing and fixing of transparent window glass as per direction of site in-charge. 13 finishing walls with acrylic smooth exterior paint of required shade :new work ( two or more coat applied @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer applied@ 2.20 kg / 10 sqm ) 14 providing and fixing isi marked flush door shutters conforming to is :2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including isi marked stainless steel butt hinges with necessary screws. 15 metallic ladder along the side of roof 16 providing and fixing t-iron frames for doors, windows and ventilators ofmild steel tee-sections, joints mitred and welded, including fixing ofnecessary butt hingesand screws and applying a priming coat of approved steel primer. fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) . 17 tile flooring having mortar ratio in 1:4 18 providing and fixing factory made isi marked steel glazed doors, windows