supply, installation, testing, commissioning of 8 mtr decorative single arm street light pole work for behror-alwar road , supply and erection of decorative cast iron pole as per approved design of following length with base plate on the cement concrete foundation of m-15 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (is 1367 p iii). the pole shall be made of cast iron as per is 210:1993, precision machining and filling job to achieve good finish and a fine coat of primer on each element before assembling. after assembling of each element one coat of primer and two coats of p.u. paint are applied. approved coloured uv resist coating of mat/ glossy/ metallic finish followed after air drying of pole. the pole shall have a weatherproof flush door and locking arrangements, two/ one arm bracket of length of 430/380mm complete in all respect.8 mtr , p/ f ip-65/ ip-66 protected street light luminaries on existing bracket. fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power leds .diffuser / glass cover for ensuring ip-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power led. integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to iec standards. system life of 50000 burning hours with 70 % of initial lumens maintained. fixture shall be in ce compliance.led street light fixture 210 watt , providing and laying stranded/ flexible annealed bare copper conductor ,xlpe/pvc insulated suitably laid up together overall polyester taped al (inner sheeted gi steel wire mylar/drain wire) along with atc drain wire , round/steel armoured overall pvc sheathed (st-1) overall screened core armoured instrumentation cables generally confirming to pas 5308- part-2-2009.2.5 sqmm 3 core , 150 mm dn/id hdpe dwc (external annular corrugated and smooth internal walls) sn-8 as per is 16098 part 2 , providing & laying xlpe insulated / p.v.c. sheathed cable of 1.1 kv grade with aluminium conductor armoured of is:7098-i/1554-1 approved make in ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.25 sqmm 4 core , pipe earthing as per is:3043 with perforated 3.0 mtr. long, 40 mm dia. b class g.i. pipe including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and c.c. finished chamber covered with hinged type with locking arrangement c.i. cover, c.i. frame of size 300mm x 300 mm and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance as required. , s & laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles,making connection etc. as required. 6 swg g.i. wire , p&f 240/415 v mcb of breaking capacity not less than 10 ka (b/ c/ d tripping characteristic) isi marked is 8828(1996)]/ conforming to iec 60898 in existing board/sheets including making connections with lugs,testing etc. as required.6a to 32a mcb