supply of machining of turbine fasteners , stud m48x225 ( hw-026.407 ) -- machining as per std.st01011 ( size no.407 ) rev.17 scrap wt : 2.252 kg per no. , hex screw m42x150 ( hw-046.028 ) -- machining as per std. st02027 ( size no.028 ) rev.14 scrap wt : 4.335 kg per no. , hex screw am48x160 ( hw-046.031 ) -- machining as per std. st02027 ( size no. 031 ) rev.14 scrap wt : 6.099 kg per no. , hex nut pm24 ( hw-062.47 ) -- machining as per std. st03003 ( size no.024 ) rev.02 scrap wt : 0.465 kg per no. , coupling nut m30 ( hw-090.03 ) -- machining as per drg. 41430901008 rev.02 scrap wt : 1.444 kg per no. , screw press soc. pm 24x55 ( hw-122.126 ) -- machining as per std. st01017 ( size no. 126 ) rev.04 scrap wt : 0.41 kg per no. , pin taper 40x260 ( hw-201.120 ) -- machining as per std. st05019 ( size no. 120 ) rev.01 scrap wt : 2.964 kg per no. , socket head screw m27x190 ( hw-297.21 ) -- machining as per drg. 41150121001 rev.00 , socket head screw m27x135 ( hw-297.22 ) -- machining as per drg. 41150121002 rev.00 , lever ( hw-359.86 ) -- machining as per drg. 31150521002 rev.00 , tie rod ( hw-364.84 ) -- machining as per drg. 31172327001 rev.00 => limited