high purity water distillation system high purity water distillation system , high purity water distillation system , technical specifications 1. water purification system should be capable of producing 18.2 megaohm resistivity with pretreatment cartridge, reverse osmosis and mixed bed ion exchange resins and activated carbon in a single pack, with feed water acceptance of upto 2000micro siemens conductivity, fouling index ( sdi ) < 12, total chlorine < 1 ppm. 2. all in one pack which contains a combination of technologies to produce ultrapure water from tap water directly. 3. the 1st stage of the ro di cartridge should contain pretreatment for reverse osmosis followed by ro membrane. 4. the 2nd stage should contains mixed bed ion exchange resin and organex for removal of organic contaminants. 5. it should have only cartridge in the system. if the system comes with more than one cartrdige then all other t cartridge should be quoted mandatorily 15 numbers ( including ro ) along the main quote. need to mention all cartridge catalogue number with quantity. 6. type 3 water flow rate should be 5 litre / hour 7.50 lite pe tank. 8. product water specifications resitivity:18.2meg ohm.cm ( @ 25 degree c ) conductivity : < 0.055us / cm toc: <5 ppb bacteria : <0.1 cfu / ml pyrogen : <0.001eu / ml rnase: <0.01 ng / ml flow rate: 0.5 l / min particulates> 0.22u:< 1 p / ml