supply, installation, testing & commissioning of ( 2x50 ) hp submersible water pumping system for chilla power house-2 50hpsubmersible pump ( as per attached specification ) 3 50 hp star-delta starter ( as per attached specification ) 4 submersible cable ( as per attached specification ) 5 6” gi pipe line ( as per attached specification ) 6 part b- works 7 dismantling & re-assembling of old pipe lines ( length- 50mtr ) including of new gasket, ss nut bolt and t&p for completion of work. 8 assembling of new pipe ( length-65mtr ) line with 2 new submersible pumps including of new gasket, ss nut-bolt, short / long bend and t&p for completion of work. 9 providing & fixing of 150mm microprocessor based electromagnetic bi directional flow meter. flow range-0.5m / sec to 10m / sec.electrod material:- ss316. output-4 to 20 ma. 10 starter panel installation work with providing & fixing of insulation mate with 1mtr*2mtr. 11 signalling works on control room with 7” hmi, control cable, on / off / trip alarm indication system. 12 painting works on pipe line. 1 coat primer & 2 coat paint with blue colour. 13 providing & fixing of 150mm nrv with both side mounting flange, ss nut bolt, seal, gasket. minimum 6kg / cm2