fire dectection and alarm system st/2020/69/2 fire dectection and alarm system , microprocessor based addressable main fire alarm control panel facp-1 with 2 loops located at mrss substation (urea) with alarm indication of all zones (facp-1 & facp-2), with its own battery and battery charger. , microprocessor based addressable fire alarm control panel facp-2with 2 loops located at old ammonia substation withalarm indication of all zones (facp-1 & facp-2) with its own battery and battery charger , microprocessor based central monitoring station repeater control panel (rcp) located in the nfl fire stationwith alarm indication of all zones and detectors/devices (facp-1 & facp-2) with its own battery and battery charger , a master system laptop with printer (workstation) for controlling / programming of fire alarm control panel (facp-2), repeater control panel (rcp) and main fire alarm panel (facp-1). , non addressable manual call points , non addressableis (intrinsically safe) manual call points for hazardous area (gas group iia/iib) , non addressable smoke detectors / heat detectors as per site requirement , non addressable is (intrinsically safe) smoke detectors / heat detectors for hazardous area (gas group iia/iib) as per site requirement , non addressable electronic hooters/sounders , non addressable beacon/flashers , control cables - 1.1 kv grade to is: 1554, overall frls sheath, screened armoured & twisted size: 2c x 1.5 mm 2. , redundant optical cables between fire panels and repeater panel with ring topology , smoke detector/ heat detector removal and test toolkit , supply of mandatory recommended accessories / any other item not listed in the bom but required for the functioning of the system must also be quoted separately. , installation, testing and commissioning charges of fire dection & alarm system as per annexure-i (if any)