rate through e - quotations are invited for material category annexed as ( i ) 20 h.p. solar pump, vfd, solar panel set and ii ) 10 h.p. dc solar pump, solar panel, steel structure supplying, installation and commissioning for lift irrigation scheme rate through e - quotations are invited for material category annexed as ( i ) 20 h.p. solar pump, vfd, solar panel set and ii ) 10 h.p. dc solar pump, solar panel, steel structure supplying, installation and commissioning for lift irrigation scheme , for 20 hp spv ac surface pump , solar module mounting ( galvanised steel ) surface structure ( for 50 kw ) having hot deep galvanised ofzinc thickness 80micron and as per is4759 with c channel $ anti theft with nut bolt of grade ss304, which should also withstand high wind velocity upto 150km / hr or as per mnre. , 50kwp spv module of 330wp or higher rating, which must have specification as per is 14286 / iec 61215 .the module must have to quilifyis / iec 61730 part i $ ii ( or having mechanical load test of 5400pa ) for safety purpose.module to module wattage mismatch in spv array shall be + / -3% and to qualify iec ts 62804-:2015 for the detection of potential induced degradation and warranted for output wattage not less than 90% in 10yrs and 80% at the end of 25yrs as per mnre. , spv controller / vfd integrated with gprs, having mppt , protection ip 65 or above as per mnre to run 20hp ac solar pump. , solar cable 4 mm2usedas per is 694 or as per mnre. , copper cable 95 mm2 used as per is 694 or as per mnre. , arrangement of lightening arrestor excluding earthing for 50kw & 3 nos. 20hp solar pump , 20 h.p. a.c. solar pump set ofhaving performance with respect to total head, maximum current, capacity, voltage range etc as per mnre guidelines. , array junction box ( ip 65 or above ) as per mnre for 50kw spv. , miscllaneous accessories for installation of 20h.p. solar pump , supplying, installation and commissioning charge of module and structure for 50kw. , maintenance for atleast 5 years or as per mnre guidelines for 50kw spv module & 3 nos. 20hp ac solar pump with all accessories , for 10 hp spv dc surface pump solar module mounting ( galvanised steel ) surface structure for 50 kw having hot deep galvanised ofzinc thickness 80micron and as per is4759 with c channel $ anti theft with nut bolt of grade ss304which should also withstand high wind velocity upto 150km / hr or as per mnre. , 50 kwp spv module 330wp or higher which must have specification as per is 14286 / iec 61215 .the module must have to quilifyis / iec 61730 part i $ ii ( or having mechanical load test of 5400pa ) for safety purpose.module to module wattage mismatch in spv array shall be + / -3% and to qualify iec ts 62804-:2015 for the detection of potential induced degradation and warranted for output wattage not less than 90% in 10yrs and 80% at the end of 25yrs as per mnre. , spv controller / vfd integrated with gprs, having mppt , protection ip 65 or above as per mnre to run 10hp dc solar pump. , solar cable of 4mm2 used as per is 694 or as per mnre , copper cable 25mm2 used as per is 694 or as per mnre. , arrangement of lightening arrestor excluding earthingas per mnre for 50kw spv $ 5 nos 10hp dc solar pump. , 10 h.p. d.c. ( pmsm / bldc / srm ) solar pump set ofhaving performance with respect to total head, maximum current, capacity, voltage range etc as per mnre guidelines. , array junction box ( ip 65 or above ) as per mnre for 50 kw spv. , miscllaneous accessories for installation of 10 h.p. solar pump , supplying, installation and commissioning charge of module and structure for 50kw. , maintenance for atleast 5 years or as per mnre guidelines for 50kw spv module & 5 nos. 10hp dc solar pumpwith all accessories