e-312-21-0039-93-1 turbine fasteners-machining , stud m27x210 ( hw-026.156 ) -- machining as per std. st01011 ( size no. 156 ) rev.d scrap wt : 1.159 kg per no. , stud m36x175 ( hw-026.251 ) -- machining as per std. st01011 ( size no. 251 ) rev.d scrap wt : 1.292 kg per no. , cap nut am27 ( hw-048.027 ) -- machining as per std. st03005 ( size no. 027 ) rev.03 scrap wt : 1.054 kg per no. , cap nut m36 ( hw-048.036 ) ) -- machining as per std. st03005 ( size no. 036 ) rev.03 scrap wt : 2.211 kg per no. , hex nut pm24 ( hw-062.47 ) -- machining as per std. st03003 ( size no.024 ) rev.02 scrap wt : 0.465 kg per no. , connection piece ( hw-114.55 ) -- machining as per drg. 21181801053 rev.00 scrap wt : 2.518 kg per no. , threaded piece ( hw-114.59 ) -- machining as per drg. 31160418012 rev.00 scrap wt : 0.285 kg per no. , taper pin 20x220 ( hw-114.91 ) -- machining as per std. st05023 ( size no. 086 ) rev.04 scrap wt : 0.294 kg per no. , washer m24 var.02 ( hw-117.69 ) machining as per drg.4-13150-18004 rev.00 scrap wt : 0.256 kg per no. , pin ( hw-174.213 ) -- machining as per drg. 41230425015 rev 00 scrap wt : 2.289 kg per no. , stud m24 x 200 ( hw-174.246 ) -- machining as per drg. 41315018002 rev.01 with matl. aa10622 rev.10 scrap wt : 1.069 kg per no. , lock washer ( hw-174.27 ) -- machining as per drg. 4-10606-01005 rev.00 scrap wt : 0.133 kg per no. , pin cyl. a12n6x30 ( hw-189.042 ) -- machining as per std. st05001 ( size no.042 ) scrap wt : 0.124 kg per no. , roller ( hw-189.042 ) -- machining as per drg. 41140202062 rev.00 => limited