supply of electrical items for 2x500 mw, dtps, anpara-1 moulded case circuit breaker (mccb): 200 amp, tpn (3 pole+neutral), rated current ie=200 amp, rated operating voltage ue= 690 volt with standard short circuit breaking capacity icu= 40-50 ka at 50 hz, 415v, comply with iec 60947-1 & 2 and en 60947-1 & 2, having overload and short circuit release. make- havells 2 miniature circuit breaker (mcb)- rated voltage ue: 240/415v, 50 hz, no. of poles: 3p+n, rated short circuit breaking capacity: 10ka, protection class: ip-20, mounting: clip on din rail, characteristic curve: c, complying standard: en 60898-1 case & cover: moulded, flame retardant thermoplastic material rating 20amp make- havells 3 miniature circuit breaker (mcb)- rated voltage ue: 240/415v, 50 hz, no. of poles: 3p+n, rated short circuit breaking capacity: 10ka, protection class: ip-20, mounting: clip on din rail, characteristic curve: c, complying standard: en 60898-1 case & cover: moulded, flame retardant thermoplastic material rating 32amp make- havells 4 miniature circuit breaker (mcb)- rated voltage ue: 240/415v, 50 hz, no. of poles: 3p+n, rated short circuit breaking capacity: 10ka, protection class: ip-20, mounting: clip on din rail, characteristic curve: c, complying standard: en 60898-1 case & cover: moulded, flame retardant thermoplastic material rating 63amp make- havells 5 tpn switch fuse unit, 250 amp. in sheet steel enclosure, operating voltage 415v, 50hz make- siemens/ nl&t n 6 instrument selector switch, rotary switch (ass), iec/en-60947-5, is-13947-5, ui-550v, 10a, current in each phase with off 4 position 90 indicating plate size 65x65mm sq (ammeter selector switch), kaycee make 7 200 amp, tp switch fuse unit with 03 nos hrc fuse link, 125amp, ref-din (cssdf200d3), range 32a-800a, 415v 50hz, conforms to is/iec 60947-3/is13947-3, c&s make 8 200 amp, tpn switch fuse unit with 03 nos hrc fuse link, 125amp, ref-din (cssdf200d3n), range 32a-800a, 415v 50hz, conforms to is/iec 60947-3/is13947-3, c&s make 9 63 amp, tpn switch fuse unit with 03 nos hrc fuse link, 63amp, ref-din (cssdf200df63d3n), range 32a-800a, 415v 50hz, conforms to is/iec 60947-3/is13947-3 for ldb, c&s make 10 125/80 amp, tp switch fuse unit with 03 nos hrc fuse link, 125amp, ref-din (cssdf125d3), range 32a-800a, 415v 50hz, conforms to is/iec 60947-3/is13947-3, c&s make 11 125/80 amp, tpn switch fuse unit with 03 nos hrc fuse link, 125amp, ref-din (cssdf125d3n), range 32a-800a, 415v 50hz, conforms to is/iec 60947-3/is13947-3, nc&s make n 12 instrument selector switch, rotary switch (vss), iec/en-60947-5, is-13947-5, ui-550v, 10 voltage between phase with off 4position 90 indicating plate size 65x65mm.sq. (volt meter selector switch), kaycee make 13 200 amp. tpn dc switch, ref- din (cssdf200d2) range 32a-800a, 415v 50hz, conforms to is/iec 60947-3/is13947-3, 14 32 amp. tpn dc switch, ref- din (cssdf32d3n) range 32a-800a, 415v 50hz, conforms to is/iec 60947-3/is13947-3, c&s make 15 63 amp. tpn incoming on/off switch fuse unit ref-din (cssdf200df63d3n) 415v, 50hz, confirms to is/iec 60947-3/is 13947 for lighting panel, c&s make 16 auto manual switch 3 pole, two way with off iec/en-60947-5, is-13947-5, ui-550v, 10a, 4-position 90, kaycee make 17 32 amp. dp incoming on/off switch (rotary type) din (cssdf32d2) range 32a-800a, 415v, 50hz, confirms to is/iec 60947-3/is 13947-3 c&s make 18 32 amp. dc connector, dc coil, confirms to is/iec 60947-3/is 13947-4-1 & iec-60947-4-1, ref-tp 1-d32 101, c&s make 19 200 amp. tp dc contactor (220v dc), conforms to is/iec 60947-3/is13947-4-1 & iec-60947-4-1, ref-lc 1-fdp-200a, c&s make 20 63 amp. power contactor, 3pole, ac, ac coil, size- frame3, ac1 duty a-80, ac3 415v long life (kw-37, hp-50, a-63) tclci-d633: ac60, c&s make 21 control fuse- 10amp., iec size-f1, ref. cns (off set) clip in type, conforms to iec-60269-2/is13703-2, high breaking capacity-80ka, c&s make 22 control fuse- 4amp., iec size-f1, ref. cns (off set) clip in type, conforms to iec-60269-2/is13703-2, high breaking capacity-80ka, c&s make 23 control fuse-20amp., iec size-f1, ref. cns (off set) clip in type, conforms to iec-60269-2/is13703-2, high breaking capacity-80ka, c&s make 24 integrated led pilot lamp 22.5mm. red indicating lamp 240v, led type (rcb7-ivl74), conforms to is13947-5, c&s make 25 integrated led pilot lamp 22.5mm. green indicating lamp 240v, led type (rcb7-ivl73), conforms to is13947-5, c&s make 26 3cx2.5 sq.mm., 1.1kv, unarmoured control cable, multistrand copper conductor, xlpe insulated, inner sheath pvc type st-2, outer sheathfrls type, is-7098 (part-i)-1988, minimum thickness of pvc innersheath: 0.30mm, nominal thickness of pvc outersheath: 1.80, nominal thickness of xlpe insulation: 0.7mm., maximum conductor dc resistance at 20c: 7.41 ohm/km. approximate ac resistance at 90 c: 9.48 ohm/km. approximate capacitance: 0.10 mfd/km. current rating (direct in ground): 34 amp. current rating (in air): 30 amp., short circuit current rating for 1 second duration: 0.458 ka. 27 cable, voltage grade 1.1 kv, armoured, stranded aluminium conductor xlipe insulation, inner sheath pvc& pvc outer sheath frls type, is-7098 (part-i)-1988, 3.5cx50 sq.mm al. conductor (thickness of insulation= 1.0mm., thickness of pvc innersheath: 0.30mm, thickness of pvc outersheath: 1.56mm, approximate outer dia.= 29.5mm., gi round wire thickness= 1.6 mm., dc resistance= 0.641 ohm/km, max. conductor temperature= 90c, capacitance= 0.50 mfd/km., current= 133 amp., short circuit current= 4.7 kamp. 28 dc light lighting fixture bjdb-100 (type-tb22), 100w, gls es, 240v, 0.42 amp. 29 dc ligh lighting fixture bjdr-100 (type-tx04), 100w, spot lux, 240v, 0.43 amp. 30 dc ligh lighting fixture bjvw-200/ve (type-tw41) 31 hpsv lamp 150 watt (e), nominal lumen=15000 32 hpsv lamp 70 watt (e), nominal lumen=5800 33 complete extension wooden board, size- 7”x4” having 15 amp. switch: 1 no., 15 amp. 5 pin socket: 1 no., anchor make mounted on white mica sheet. 34 complete extension wooden board, size- 8”x10” having 5 amp. switch: 2 no., 5 amp. 3 pin socket: 2 no., anchor make mounted on white mica sheet. 35 15 amp. switch, anchor make 36 5 amp. switch, anchor make 37 pvc casing capping, size- 1.25” of length 6 ft. 38 kanti for pvc casing capping (50 no. in 1 pkt.) 39 crc, 2-26 (500 ml.) 40 alnox (electrical joint compound) tube 41 raychem- rpg make, heat shrink outdoor termination for straight through jointing kit suitable for 6.6 kv, xlpe, aluminium conductor (unearth) n1cx300 sq.mm. n 42 raychem- rpg make, heat shrink outdoor termination for straight through jointing kit suitable for 6.6 kv, xlpe, aluminium conductor (unearth) n3cx185 sq.mm. n 43 high voltage insulating tape of 25 kv/mm. dimension: 50mmx0.76x9.1m for xlpe power cable, code: 2117 44 aluminium tube terminals lugs, for lt (1.1kv), power cables for 25 sq.mm., e-bolt size: m8, code: als-521 45 aluminium tube terminals lugs, for lt (1.1kv), power cables for 25 sq.mm., e-bolt size: m10, code: als-519 46 aluminium tube terminals lugs, for lt (1.1kv), power cables for 50 sq.mm., e-bolt size: m8, code: als-225 47 copper tube terminals lugs, heavy duty for 1.1 kv, lt power cables for 6 sq.mm., e-bolt size: m5, code: cus-390 48 copper tube terminals lugs, heavy duty for 1.1 kv, lt power cables for 25 sq.mm., e-bolt size: m8, code: cus-551 49 copper tube terminals lugs, heavy duty for 1.1 kv, lt power cables for 35 sq.mm., e-bolt size: m10, code: cus-554 50 copper tube terminals lugs, heavy duty for 1.1 kv, lt power cables for 50 sq.mm., e-bolt size: m10, code: cus-556 n 51 copper tube terminals lugs, heavy duty for 1.1 kv, lt power cables for 70 sq.mm., e-bolt size: m13, code: cus-559 n 52 copper tube terminals lugs, heavy duty for 1.1 kv, lt power cables for 95 sq.mm., e-bolt size: m13, code: cus-561 n 53 copper tube terminals lugs, heavy duty for 1.1 kv, lt power cables for 120 sq.mm., e-bolt size: m12, code: cus-241 n 54 copper tube heavy duty in line connectors for lt/controls cables for 1.5 sq.mm., code: eh-453 n 55 copper tube heavy duty in line connectors for lt/controls cables for 2.5 sq.mm., code: eh-454 n