e-quotation for seeking firm rates of non-schedule items for preparing estimates. , cost towards supplying and making od type end termination jointing kit 400 mm² of reputed make for connecting the cable to 400kva transformers by providing all tools, labour and materials all complete at old piska more pumping plant , cost towards supplying and making indoor type end termination jointing kit 400 mm² of reputed make for connecting the cable with mcp in the pump house by providing all tools, labour and materials all complete at old piska more pumping plant , cost towards supplying erecting approved make 11kvht outdoor type gang operated air break triple pole switch with 3 post / pin type insulator per phase, mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft .the operating handle provided with lock and key at suitable height from ground with necessary clamps along with all labour tools and technicians ( 400a ) , cost towards supplying erecting approved make11kv out door type horn gap type fuse with insulator, fuse element with working current up to 50 amp. capacity complete erected on provided cross arm, each set comprising 3 units. ) , cost towards supplying erecting approved make porcelain pin type insulator with hardware fittings suitable for 11kv h.t. overhead line complete erected with nuts & bolts on provided cross arm. ) , cost towards supplying erecting approved make porcelain disc type insulator with hardware fittings suitable for 11kv h.t. overhead line complete erected with nuts & bolts on provided cross arm ) , cost towards supplying erecting approved make thyrite type lighting arrestors suitable for 11kv h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line ) , supplying all materials, labour, tools and tackles for making chemical earthing station with electrodes and earth fill compound ( bfc ) etc. all complete as per ie rules. , cost towards providing and fixing 25x6 mm g.i. strip at 0.5 m below ground as strip earth electrode including soldering from earthing point to both motor & panel. , cost towards supplying new transformer oil up to strength of 60 kv up to the level mark required , cost towards filtering of transformer oil by oil filtering machine and testing the oil strength up to 60 kv. , cost towards supplying & fitting ct unit ( set of 3 ) of ratio – 60-30 / 5-5a , hsv – 12kv, iv – 28 / 75 kv, frequency – 50 hz, stc – 13.1 ka, period - 1 sec. for 800amp schneidermake outdoor type vcb complete set. , cost towards supplying & fitting pt unit ( set of 3 ) of ratio – [ 11000 / v3 , 110 / v3 v ] , hsv – 12kv, iv – 28 / 75 kv, frequency – 50 hz, ovf – 1.2 cont & 1.5 for 30 sec , stc – 13.1 ka for 800amp schneider make outdoor type vcb complete set.