supply of c and i items for ptpp , parichha-1 smps n12 v, 5a, smps power supply 2 smps n 5v, 40 a smps 3 smps n 5v, 2 a smps 4 ic max n ic max-485 5 repeater n rs-485 repeater 6 4g lte router (sim based router) n dlink model no. dwr-921, make : dlink 7 dual channel conductivity analyzer n specification:- cut out dimensions 138x138mm, output signal 4-20 ma(2 port), operating supply 240v ac, range 0-100 micros/cm, compatible with model no. 09125=a=0004 make polymetron n 8 conductivity sensor nspecification:- sensor model no.cs-40, with draw able type with ball valve, process connection 1”npt (m), range 0-100 micros/cm, electrode material ss-316, sensor cable length 15 mtr .cell constant(k)-0.01 n 9 combined tss, ph, temp. analyzer/controller n specification : analog output:- isolated 4-20 ma for each parameters tss, ph, temp. modbus details:- protocol- modbus, baud rate - 9600, digital output - addressable rs 232 and rs485 signal in two wire/ usb communication for digital output & with online data transfer facility to uppcb/cpcb server. display - lcd display, caliberation : auto, manual, remote, temp. range : -5 to 85 deg. c, operating voltage : 230 v ac, 50 hz, tss measuring units ntu, mg/litre, ppm, tss measuring range : 0-1000 mg/litre, ph measuring range : 0.00-14.00, temp. measuring range -5.0 to 110 deg. c, warranty : one year after commissioning & testing. make : b&c/ forbes marshall/ hach/ polymetron/gosys, germany/horriba/ tethys/ yokogawa n n n 10 ph with temperature sensor n compatible with sr. no. c1 analyzer/ controller, specification :- measurement range 0-14 for ph, -5 to 85 deg. c for temperature, sensor cable length 15 mtr.make : b&c/ forbes marshall/ hach/ polymetron/gosys, germany/horriba/ tethys/ yokogawa 11 tss sensor ncompatible with sr. no. c1 analyzer/ controller, specification :- measurement range 0-1000 mg/l, sensor cable length 15 mtr.make : b&c/ forbes marshall/ hach/ polymetron/gosys, germany/horriba/ tethys/ yokogawa 12 installation and testing of above analyzer and sensors n tss, ph and temperature signal should be available in multipoint analyzer/ controller and common output rs232 and rs485 signal in two wire/usb communication facility shall be available for online connectivity to server of cpcb/uppcb. all hardware, connecting cables and consumables required for installation and testing shall be arranged by firm.