e-312-21-0015-93-1 machining of turbine fasteners (studs / cap nut etc.) , stud am64x395 - 20x280 (hw-025.004) -- machining as per std. st01002 (size no. 004) rev.17 scrap wt : 8.607 kg per no. , stud am72x6x380 - 25x252 (hw -025.008) -- machining as per std. st01002 (size no.008) rev.17 scrap wt : 6.128 kg per no. , stud m24x115 (hw-039.151) -- machining as per std. st01010 (size no.-151) rev.15 scrap wt : 0.755 kg per no. , screw hex m36x105 (hw-041.005) -- machining as per std. st02001 (size no. 005) rev.10 scrap wt : 2.042 kg per no. , screw hex m36x180 (hw-041.007) -- machining as per std. st02001 (size no. 007) rev.10 scrap wt : 3.069 kg per no. , hex screw m24x105 (hw-044.001) -- machining as per std. st02013 (size no. 001) rev.04 scrap wt : 0.722 kg per no. , cap nut m52 (hw-047.052) -- machining as per std. st03002 (size no. 052) rev.06 scrap wt : 1.919 kg per no. , cap nut am30 (hw-048.030) -- machining as per std. st03005 (size no. 030) rev.04 scrap wt : 1.216 kg per no. , hex screw m30x110 (hw-050.003) -- machining as per std. st02010 (size no. 003) rev.01 scrap wt : 2.311 kg per no. , hex screw m42x115 (hw-050.011) -- machining as per std. st02010 (size no. 011) rev.01 scrap wt : 5.263 kg per no. , hex screw m56x185-7.5x210 (hw-050.012) -- machining as per std. st02010 (size no. 012) rev.01 scrap wt : 11.248 kg per no. , scru hex pm24x60 (hw-062.506) -- machining as per std. st02014 (size no. 506) rev.05 scrap wt : 1.307 kg per no. , shaft (hw-169.101) -- machining as per drg 21323505001 rev 02 scrap wt : 29.402 kg per no. , rotory piston (hw-172.217) -- m/cing as per drg. 31323505007 rev.00 (m/cing after assembly with shaft hw-169.101, as per tech. reqt. of drg. 31323505007 rev.00) , stud m52x220 - 20x185 (hw-172.33) -- machining as per drg. 31050210032 rev.00 scrap wt : 1.264 kg per no. , scru hex. pm24x75 (var-02) (hw-172.35) -- machining as per drg. 31050601006 rev.01 scrap wt : 1.919 kg per no. , pin cyl b22d9x65 (hw-189.206) -- machining as per std. st05001 (size no. 206) rev.23