supply of tungsten carbide tamping tool set for mfi machines, rdso specification no: tm/hm/6/320(rev-3) july 2019 & one set consist - 1. drawing no- rdso/tm/01b/16, plasser pt. no- cu30.2743.fr i-04 nos 2. drawing no- rdso/tm/01a/16, plasser pt. no- cu30.6840.fr i-04 nos 3 .drawing no- rdso/tm/15a/16, plasser pt. no- cu30.10840.fr i-08 nos make: plasser or its equivalent.tungsten carbide tamping tool set for mfi machines, rdso specification no: tm/hm/6/320(rev-3) july 2019 & one set consist - 1. drawing no- rdso/tm/01b/16, plasser pt. no- cu30.2743.fr i-04 nos 2. drawing no- rdso/tm/01a/16, plasser pt. no- cu30.6840.fr i-04 nos 3 .drawing no- rdso/tm/15a/16, plasser pt. no- cu30.10840.fr i-08 nos make: plasser or its equivalent.,tungsten carbide tamping tool set for mfi machines, rdso specification no: tm/h m/6/320(rev-3) july 2019 & one set consist - 1. drawing no- rdso/tm/01b/16, plasser pt. no- cu30 .2743.fr i-04 nos 2. drawing no- rdso/tm/01a/16, plasser pt. no- cu30.6840.fr i-04 nos 3 .drawin g no- rdso/tm/15a/16, plasser pt. no- cu30.10840.fr i-08 nos make: plasser or its equivalent w arranty: the life of tctt in a set shall be guranted for tamping of min. 2,50,000 insertions. h owever min. service life of any one tctt shall not be less than 50,000 insertions. the warra nty shall be expire 24 months after delivery at ultimate destination or 18 months from the date of fitment on machine, whichever is earlier. [ warranty period: 24 months after the date of delivery ] ]