lot no 01 construction of mrf ( material recovery facility ) center , eairach , jhansi . - 1 for shed nexcavation in foundation in ordinary soil including lift upto 1.50m and lead upto 30m and dresssing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the engineer-in-charge. 2 cement concrete with 4cm gauge stone ballast coarse sand cement in the proportion 8:4:1 including supply of all materials, labour t&p etc. reqd for proper completion of the work. 3 sand filling in plinth including supply of necessary quality of sand from a distance not exceeding 8 km. ( 5 miles ) from the site of work and including watering, dressing etc. rate to include cost of all materials, labour and t&p etc. rquired for proper completion of the work. ( rate is including royality ) 4 providing and injecting chemical for pre-constructional anti-termite treatment and creating and chemical barrier under and around the coloumn pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external per meter of binding expansion joints surrounding of pipes and conduit etc, complete ( plinth area of the building at ground floor only shall be measured as per i.s 6313 ( part 2013 ) imidacloprid sc 30.5 concentrate or any other approved material such as hepthachlor of chlordane will be used. the rate of application of chemical emulsion shall be as follows. : ( 1 ) treatment for masonry and foundation 5 liters per sq.m ( 2 ) back fill in immediate contact with foundation 7.5 liters pesq.m ( 3 ) treatment of top surface of plinth filling 5 liters per sq.m ( 4 ) treatment of soil along external per meter of building 7.50 liters per sq.m ( 5 ) treatment of soil under apron along external per meter 5 liters per sq.m 5 r.c.c. work with cement approved coarse sand and 2 cm. ( 3 / 4 ) gauge approved stone ballast in the proportion of 1:1:5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in the item. nas in item 283 ( 1 ) above but in the lighter beams, including having spans above 6 m. ( 20 ) 6 as in item 283 ( 1 ) above but r.c.c. at foundation and footing with 4 cm. ( 1.5 ) gauge approved stone ballast 7 as in item 283 ( 1 ) above but in r.c.c. t beam and slab roofs and r.c.c. columns. 8 first class brick work in 1:6 cement and fine sand of 1.25 fm. mortar in foundation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work. 9 first class brick work in 1:6 cement and fine sand of 1.25 fm. mortar in foundation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work. in superstructure ( 230 mm thick ) 10 first class brick work in 1:4 cement and fine sand of 1.25 fm. mortar in foundation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work. ( 115mm thick ) 11 mild steel or iron in plain work such as reinforced concrete or reinforced brick work ( when not included in an over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & overlapping & hooks. 12 12 mm cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. no. extra for mixing any addltive. ( iii ) 1 cement : 6 fine sand 13 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80 mm. in girth and finished even and smooth. ( iii ) 1 cement : 6 fine sand 14 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand:4 graded stone aggregate of size 20 mm nominal size ) laid in one layer finished with floating coat of neat cement ( 40 mm thick floor ) 15 p / f of glass strip 5mm thick 35mm wide 16 mild steel or iron work in heavy sizes such as trusses; builts up gates, door frames, record racks roof work, glltes etc. wrought to required form including drilling holes; rivetting or welding where necessary, and also including supply of steel, bolts, nuts etc. & their fixing required for proper completion of the work. 17 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces ) , excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 18 painting or varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t&p etc. required for proper completion of the work. paint to be used should confirm to the i.s.i.no. 103- 1950 ( for truss ) 19 painting or varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t&p etc. required for proper completion of the work. paint to be used should confirm to the i.s.i.no. 103- 1950 ( for wooden surface ) 20 supply of m.s. angle iron door, windows ventilantion frame made of approved m.s. angle iron wroght to required form including drilling hole, welding and recetting whre necessary and also including supply of all material, such as steel hinges of required size, nut & bolt etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of engineer-in-charge for proper completion of work at site of work. 21 providing and fixing g.i. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of engineer-in-charge. made of g.i. wire of dia 4 mm 22 supply of m.s. angle iron door, windows ventilantion frame made of approved m.s. angle iron wroght to required form including drilling hole, welding and recetting whre necessary and also including supply of all material, such as steel hinges of required size, nut & bolt etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of engineer-in-charge for proper completion of work at site of work. 23 providing and fixing isi marked flush door shutters conforming to is: 2202 ( part i ) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : n35 mm thick including isi marked stainless steel butt hinges with necessary screws. 24 providing & fixing stainless steel sliding door bolts isi marked with nuts and screws etc complete. ( a ) 250mm x 16mm 25 providing and fixing stainless steel towerbolts ( barrel type ) with necessary screws etc. comlete. ( a ) 250mmx10mm 26 providing and fixing stainless steel handles with screws etc. complete ( a ) 125mm 27 finishing walls with water proofing cement paint of approved make and quality on new work with two coat to give to give an even shade. including supply of all material, labour and t&p etc. required for proper completion of the work. same as in item no. 660 but for each coat of water proof cement paint after the first coat to give an even shade. 28 supply and fixing of 110mm dia pvc pipe complete with rose heads bends. m.s clamps 2.5 cm x 3 mm fixed to walls by 15 cm long 6 mm dia nail and including repair of plaster pointing etc if damaged during fixing of the pipes including cost of all material labour, tools and plant etc. required for proper completion of work. 29 supply and fixing of recess mounting cfl down light speciall designed for satin finish aluminium reflector, copper ballast suitable for & with 2 nos. 18 watt cfl complete in all respect. 30 supply and burying of 40mm dia x 4.5meters long g.i. pipe, vertically for earthing having 12mm dia. holes spaced 75mm apart drilled upto 2 meters from the bottom complete with earthing lead of no 6 to 8 swg gi wire in gi pipe upto appron ( and from appron to switch board the cost of g.i. piipe and g.i. wire will be extra ) upto switch board, 30cm square c.i. box nwith hinged cover, masonary enclosue, funnel at top, alternate layers / of charcoal / coke and salt at least 150mm thick alround etc. complete in all respects. 31 supply & fixing of one number 8 swg g.i. wire in 15mm dia. g.i. pipe for earthing, laid in wall duly concealed including the cost of cement, sand labour, t&p other material required for proper completion of the work as directed at site. 32 supply and fixing of 240 volts l series miniature circuit breaker 9 k.a. in existing mcb, db complete with connections as required. 33 supply fixing and making connection of following fpmcbs complete in all respects as per direction and satisfaction of engineer-in-charge. 34 supply and fixing of flush / surface mounting distribution boards complete in all respects. 35 supply and fixing single pole mcbs blanking plate complete in all respects. 36 providing and laying unplastisized rigid pvc pipe conforming to is:13592 type a including jointing, cutting and making good the walls & floors as per requirement. 37 add extra for 6 water taps in washing unit 38 cost of fencing wall nas per analysis of estimate 39 cost of interlocking nas per analysis of estimate 40 cost of tubewell nas per analysis of estimate 41 cost of ms gate nas per analysis of estimate 42 cost of cc road nas per analysis of estimate 43 cost of approach road nas per analysis of estimate 44 cost of toilet block nas per analysis of estimate