supply and fabrication of different item at 60 seated girls hostel polytechnic bargarh-1 supply of fabrication of chirakoot bargarh polytechnic 2 s& f of angle iron door frame chaukhat made of 40x40x5 mm angle complete for opening upto 1- mt width with 6 nos hold fast ( wt not more than 1.6 kg ) welded to the frame and it bar of 10 mm dia ms rod 4 no 5” long isi marked hinges for s / l shutter and 6 no shutter and 6 no 5” long isi marked hinges for d / l shutter fasterned to frame with welding complete including one coat of red oxide paints including cost of hinges. nnote:- 40x40x6 mm angle iron shall be used for opening more than 1 mt. n1-for one side openable shutter 3 s& f of angle iron door frame chaukhat made of 40x40x5 mm angle complete for opening upto 1- mt width with 6 nos hold fast ( wt not more than 1.6 kg ) welded to the frame and it bar of 10 mm dia ms rod 4 no 5” long isi marked hinges for s / l shutter and 6 no shutter and 6 no 5” long isi marked hinges for d / l shutter fasterned to frame with welding complete including one coat of red oxide paints including cost of hinges. nnote:- 40x40x6 mm angle iron shall be used for opening more than 1 mt. 2-extra for 5 long isi mark hinges n 4 s& f of z section window made of isi approved section ( man / hari / grover / asc / nav etc ) including all approved fittings as per design and specification complete with handles and stas with projected type hinges in outside openable & drum type inside openable window / ventilators the size of glass pan should not be more than 0.20 sqm. the t section in the window panelshould be as per drawing but it should be fixed in such a way that with one coat of red oxide paints. 1-openable type 5 s& f of z section window made of isi approved section ( man / hari / grover / asc / nav etc ) including all approved fittings as per design and specification complete with handles and stas with projected type hinges in outside openable & drum type inside openable window / ventilators the size of glass pan should not be more than 0.20 sqm. the t section in the window panelshould be as per drawing but it should be fixed in such a way that with one coat of red oxide paints. 2-fixed type 6 extra for oxidized ms tower bolts as per approved sampler & welding with ms plate 25x4 mm in full length of window. 1-150x10 mm size isi 7 extra for oxidized ms tower bolts as per approved sampler & welding with ms plate 25x4 mm in full length of window. 2-100x10 mm size isi 8 s& f of window grill made of 10 mm sqr bar flat 20x4 mm vertical square bar spacing between 75 mm to 100 mm and horizontal bar 6 to 8 no as per approved drawing for chc and ats project ( model drawing enclosed of h.o ) 9 supply of fabrication of machine woven g.i.mosquito proof jali 14x24 specification with double frame of 20x4 mm flat at bottom and 20x4mm flat frame at toop and provision of same frame on centre mullion on window at work dhop as per drawing and specification 10 s / o sheet door shutter i / c angle 40x40x5mm, 32x32x3 mm, flat 40x5 mm, 20x3 mm with ms sheet 1.00 mm thick, hinges hold fast with locking arrangement and red oxide primer