construction of icds centre at arya t.e bar:-1.00 earth work in excavation of foundation trenches or drains in all sorts of soil ( including mixed soil but 2.00 laying 150 mm. to 200 mm. boulder soling including rough dressing hand packing and 3.00 cost of stone boulder 150 mm size delivered ans stacked at site 4.00 ( i ) cement concrete with graded stone ballast ( 40 mm size ) excluding shuttering. in ground floor. 5.00 rubble masonry in cement ( 1:6 ) with hard dressed stones from approved quarries and clean, coarse 6.00 rubble masonry in cement ( 1:6 ) with hard dressed stones from approved quarries and clean, coarse 7.00 ordinary cement concrete ( mix 1:2:4 ) with graded stone chips ( 20 mm nominal size ) excluding 8.00 reinforcement for reinforced concrete work in all sorts of structures including distribution bars, 9.00 hire and labour charge for shuttering with centering and necessary staging up to 4m using 10.00 125 mm. thick brick work with 1st class bricks in cement mortar ( 1:4 ) in ground floor. 11.00 m.s. structural works in roof trusses with tubular sections conforming to is: 806- 1957 & is: 1161- 12.00 galvanized corrugated iron sheet work ( excluding the supporting frame work ) fitted and fixed with 10 13.00 galvanised iron sheet ridging fitted with necessary bolt, screws, washers etc complete. ( 225 mm end 14.00 galvanized iron sheet eaves gutter fitted and fixed with necessary 50 mm x 6 mm.m.s.flat bar clamps 15.00 wood work in door and window frame fitted and fixed in position complete including a protective 16.00 panel shutters of door and window, as per design ( each panel consisting of single plank with out 17.00 iron butt hinges of approved quality fitted and fixed with steel screws, with isi mark. 18.00 supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar , end 19.00 anodise aluminium barred / tower / socket bolt ( full covered ) of approved manufactured from extruded 20.00 anodise aluminium aldrop / sliding bolts of approved quality manufactured form extruded 21.00 anodised aliminium d-type handle of approved quality manufactured from extruded section 22.00 supplying, fitting and fixing windows and ventilators with or without integrated grills 23.00 plaster ( to wall, floor, ceiling etc. ) with sand and cement mortar including rounding off or 24.00 plaster ( to wall, floor, ceiling etc. ) with sand and cement mortar including rounding off or 25.00 ceiling of commercial ply as per design fitted and fixed complete ( excluding the supporting frame 26.00 synthetic distemper to interior wall, ceiling with a coat of solventbased interior grade acrylic primer 27.00 ( b ) priming one coat on timber or plastered surface with synthetic enamel oil bound primer of 28.00 ( a ) painting with best quality synthetic enamel paint of approved make and brand including 29.00 provision for electrification, plumbing sanitation. 30.00 provision for painting for art