tender for estimate for extension work to pm-awas pvtg 01 no. benificiaries at village khairi-01 nos. , pvtg 16 no. benificiaries at village agora(01)-16 nos. and pm-awas pvtg 26 no. benificiaries at village bhitora-19 nos.,dariyapur-02 nos,thaily-01 nos,maharajpura-01 nos, lamayacha-04 nos,gandhari-01 nos. under datia r_dc,o&m divi. datia- 1 task 1 - task name:- : d-2.1 material, material supplied by mpmkvvcl 2 140 kg.,8.0 mtrs. long pcc pole 3 lt aerial bunched xlpe cable 3 x 25+ 1 x 16+ 1 x 25 sqmm with aluminium alloy bare messenger wire 4 task 1 - task name:- : d-2.1 material , material supplied by contractor 5 lt a.b cable tension clamps (galvanized) 6 lt a b cable suspension clamps (galvanized) 7 piercing connector type-i for single/three phase (main 16-50 sqmm tap-off 16-50 sqmm) 8 piercing connector type-ii (main 16-50 sqmm tap-off 16-50 sqmm) 9 m.s.nuts with bolts 10 single phase service connection box (deep drwan metal service connection boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector- 11 task 2 - task name:- : e- 1.1 material , material supplied by mpmkvvcl 12 140 kg.,8.0 mtrs. long pcc pole 13 11 kv(45kn) composite polymer disc insulators 14 11 kv strain hardware (t&c type) fittings 15 11 kv d.o. fuse unit polymer type 16 9 kv gapless type ( 5ka) polymer for dtr 17 bi-metallic clamps distribution transformers bushing 18 three phase static energy meters 20-80 amps.with l.s. & tod facility with box 19 xlpe cable 1 core unarmoured 35 sqmm aluminium conductor 1100 volts 20 11/0.4 kv distribution transformer 25 kva (conventional) (aluminium wound)(rep-bgp) 21 aaac rabbit conductor 0.05 sq. inch. (55 sq.mm. al.eq.) 22 xlpe cable 1 core unarmoured 70 sqmm aluminium conductor 1100 volts 23 task 2 - task name:- : e- 1.1 material , material supplied by contractor 24 stay set complete without stay wire 16 mm. (painted) 25 stay wire 7/3.15 mm.(7/10 swg) 26 stay insulators 90x65mm 27 stone block/pre cast block for base pedding(450x450x75mm) 28 concreting of structures & foundation (1:3:6) 29 concreting of stay (16 mm / 12 mm) @ 0.2 cmt. per stay 30 complete jumpering of dtr 31 danger boards enamelled 11 kv 32 red oxide paint 33 aluminium paint 34 m.s.nuts with bolts 35 meter cum protection box for 25 kva dtr 36 g.i. strip 25x3 mm1 37 g.i.pipe 40 mm dia c grade type 38 bentonite compound powder 39 galvanized nut & bolt with washer 40 task 3 - task name:- : service connection charge material supplied by mpmkvvcl 41 single phase electronic meter with data downloading facility & box 5-30 amps. 42 pvc 2 core un armoured 2.5 sqmm aluminium conductor 43 task 3 - task name:- : service connection charge material supplied by contractor 44 wooden board 10x8 45 3 pin 5a socket (two no. piano type switch, bulb bakelite holder with wiring & e 46 led lamp with 9 watt (complete) 47 pvc bush 48 switch board 49 rack bolt/screw 50 task 4 - task name:- : c- 1.4, material supplied by mpmkvvcl 51 140 kg.,8.0 mtrs. long pcc pole 52 11 kv pin insulator polymer composit (5 kn) 53 aaac rabbit conductor 0.05 sq. inch. (55 sq.mm. al.eq.) 54 task 4 - task name:- : c- 1.4 , material supplied by contractor 55 earthing coil of 115 turns of 50 mm.dia and 2.5 mtr. lead of 4.0 mm g.i wire 56 back filling of poles with boulders. 57 red oxide paint 58 danger boards enamelled 11 kv 59 aluminium binding wire and tape 60 m.s.nuts with bolts 61 fabricated material , material supplied by mpmkvvcl 62 d.c. cross arms 5 ft centre to center (100x50x6 mm) channel 63 transformer mountingchannel (100x50x6 mm.) 64 11 kv v cross arm 65x65x6 mm. angle type 65 11 kv top clamp 65x65x6 mm. angle type 66 trans. belting with 50 x 50 x 6 mm.angle with two cross fixing channels 67 clamp for 140 kg pcc pole ms flat 50x6 mm 68 back clamp for 140 kg pcc pole ms flat 50x6 mm 69 d.o.mounting channel 75x40x6mm 70 labour & transportation charge 71 18 % gst on total cost