tender for supply and delivery of light commercial vehicle (1 no) in chettiyarpatti town panchayat , displacement (cc)/engine apacity 700 cc-1250 cc,max power :20-30bhp @ 2500rpm and above,max torque :500nm @ 2000 rpm and above,type of fuel:diesel,load capacity :2 cu.m ,vehicle emission norms:bs-vi,no of cylinder in engine :2-4 cylinder ,length of chassis :3800 mm - 3950 mm,width of chassis :1500 mm-1550 mm & ground clearance.150mm-165mm ,fuel tank capacity :diesel-30 ltrs to 40 ltrs & cng-12-25kg ,size of tyres & nos :145 r &12-5 nos ,wheel base : 1900 mm - 2250 mm ,gross vehicle weight :1550 kg - 1900 kg,clutch :single plate dry friction diaphragm ,transmission system :manual ,no of speed-forward gears : 4 nos speeds(4f+1r),type of steering :manual / power ,speed governors :shall be fitted ,pay load:800kg to 1000kg,tipper body length :2100 mm - 2200 mm, mild steel,tipper body width :1400 mm - 1500 mm & mild steel ,tipper body height:750 mm - 950 mm & mild steel,side portion (lh & rh) & rear doors sheet thickness :2 mm & mild steel,tipper body top sheet including frame sheet thickness :1.6 mm & mild steel,tipper body top lid sheet thickness :1.2mm & mild steel,tipper container:tipper container should be fabricated with two doors on the rear side and four doors on four top corners of the containers with hinges and locking system. a partition should be provided on the middle of container along the vertical lenth of the body,tipper body top lid main sheet thickness :75 x 40 x 6 mm,hydraulic cylinder make :reputed make,hydraulic system driven :main engine,pump make :as per is standard ,painting :should be painted with one coat of anti-corrosive epoxy primer and two coats of enamel paint for approved quality to ensure long lasting resistance for weatherizing and breakage. the color shade should be as per norms,lettering :to be carried out as directed by dept officers,tipper body rear door :shall be with necessary locking facility,side safety guard:shall be provided as p