tender for special repair to building no t 06 at nagtalao under ge banar.; 1 dismantling of plain or corrugated steel sheeting, any gauge,thickness, including nainital or similar pattern roof coverings complete all as specified. 2 s&f pre-painted galvatume aluminium zinc coating gi based corrugated steel sheet 0.5mm thick of colour having tensile strength of 550 mpaas in roof covering/cladding to wall,fixed with hot dip galvanised self drilling fasteners with epdm washers (one fastener on each crest) complete all as specified. 3 dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. 4 m & lroof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc con-forming to fe 410 -w (gde-e- 250) complete all as specified. 5 s&f mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, includingbending or turning up, mitred anglesetc as required (thickness of sheet 0.63 mm) complete all as specified. 6 m&l for preparing new steel surfaces of any description over10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified. 7 taking down chowkats or frames with shutters not exc. 1.5 sqm each complete all as specified. 8 s&f of steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified. 9 s&f 4mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 sqm each panel complete all as specified. 10 dismentling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified. 11 s &f calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid including anodised aluminum snapgrid frame work complete all as specified. 12 demolition brick work or stone/boulder masonary built in cement mortar or cement lime mortar includinhg all quoins arches, pillars etc but excluding ashlarfacing dressed stonework and precast concrete articles complete all as specified. 13 m&l forbrick work with fly ashbricks straight or curvedon plan exc 6 m mean radius built in1:6 cement mortar all as specified. 14 m&l for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified. 15 m&l for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified. 16 m&l for three coats of white wash including preparation of new surfaces on walls complete all as specified. 17 m&l for preparation new plastered or unplastered surface and applying two coat of cement base paint on walls complete all as specified. 18 demolition of cement concrete (unreinforced) or any type of flooring in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified. 19 m&l for 75mm thick cement concrete type d - 2,1:4:8 (40 mm graded agg) as in sub base to floors incl well compacting & laid to levels complete all as specified. 20 m & l for 100mm thick cement concrete type b-1, 1:2:4 (20mm graded aggregate)inbases, floors and pavings etc complete all as specified. 21 m & l for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of m-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified. 22 m&l pre-cast concrete block as in kerb stone (machine made) with solid blockstype b1 1:2:4 (20 mm graded aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified.