construction repair & renovation of works 02 nos of a.e.o. qtr at tangi for the year 2025-26- 1 dismantling & removing old grading plaster from roof slab cleaning the surface lowering & removing the debris within 50m lead lead including cost of all etc. complete as per specification and direction of the engineer-in-charge. 2 25mm thick grading concrete with c.c ( 1:2:2 ) with 6 mm size hg h .g. chips of approved quality & from approved quarry including laying concrete , watering curing including cost , conveyance , royalty, taxes of materials with all labour and t&p articles required for the work etc. complete in all respect as per direction of the engineer in charge . 3 fly ash brick masonary in cement mortar (1:6) using fly ash bricks of 9/10 size having a crushing strength of not less than 75kg/cm2 including splays cutting circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use with watering, curing including cost, conveyance, royalties, taxes of all materials, labour with t&p required for the work etc. complete as per specification and direction of the engineer-in-charge. in super structure 4 supplying, fitting & fixing of m.s. iron doors & windows choukath with shutter & flat & angel frames grill made out of m.s. flat grill gate made out of iron plate shutter with angel choukath with cost of grill including cost, conveyance of all materials, labour, all types of taxes etc. complete as per specification & direction of the engineer-in-charge . 5 16mm thick cement plaster with c.m. (1:6) over brick masonry & wall surface after racking out joints, cleaning & finishing the plaster surface smooth including watering, curing, scaffolding, screening sand with cost, conveyance, royalty and taxes of all materials and cost of all labour with t&p etc. complete as per specification and direction of the engineer-in-charge . 6 supplying, fitting & fixing of chequered tiles in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour t&p etc required for the work all complete as per direction of the engineer-in-charge 7 providing fitting and fixing of vitrified tile (coloured/ printed) in floors of size 600mm x 600mm of approved make with application of polymer modified cement base water resistance adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost, conveyance, royalty, taxes of all materials and cost of all labour t&p required for the work etc . complete as directed by the engineer-in-charge . 8 providing fitting and fixing of vitrified tile (coloured/ printed) in dado in force tread or steps on 12mm thick bed of cement mortar (1:3) joint with net cement slory mixed with pigments to materials the shades of tiles including rubbing & polishing etc. with cost, conveyance and taxes of all materials and labour with t&p required for the work etc . complete in all respect as direction of the engineer-in-charge . 9 painting two coats with any approved enamel paint over a coat of approved primer to wood work and iron work including cost of the primer and paint , sand papering, polishing the surface with cost, conveyance & taxes of all materials and labour with t&p required for the work etc . complete in all respect as direction of the engineer-in-charge . 10 distempering two coats to walls with distemper paint of approved shade on new work/old work two coats to give an even shade including scaffolding, staging charges with cost, conveyance, taxes of all materials, labour with t&p required for the work etc. complete as per specification and direction of the engineer-in-charge. 11 finishing walls with weather coat paint ( weather based ) cement based wall puty paint of approverd shade on wall surface to give an even shade including sand papering including cost of cement paints, brushes etc. including cost , conveyance , taxes of all materials with all labour and t&p articles required for the work etc. complete in all respect as per direction of the engineer in charge 12 factory made girid frp or called grp sandwich composite door shutter of 32mm thick laminated with two grp skin with good grain finish fabricated using uv stabilised isoppthalic gel coat and one layer of 450 gsm e-glass chopped strand mat (csm) impregnated with ortopathilic resin the thickness of the skins shall not be less than 1.50mm . expanded polysryne ( eps) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . a structural adhesive compatible with (eps)foam shall be used for bending the core material. the sal wood reinforcements and the skin the material and process for manufactuing te door shutter shall conform to rv -tifac components design centres standards and specification and the door shutters tested in conformation to is 4020-1998. the finish of door shutter will be plain colour as per specification and direction of the engineer in charge. etc. complete as per specification and direction of the engineer-in-charge. please enable macros to view boq information