BRR : 8584901
Tender Brief : Tender For Annual Plan-2025-26 Improvements To Eruvaikkonam Sub-Centre-Project No. 13/26-General Civil Work - Maintenance Work 2 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 3 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bol... Read More
Tender Value
₹
1,60,988
Contract Value
₹ 1,36,518.33
Saving / Difference
₹ 24,470
▲
Submission Date
15-10-2025
Contract Date
01-01-2026
Completion Date
180 days
Participated Bidder List
3 No of Bidder(s)
| Sr No. | Bidder Name | Bid Analytics | Technical Bid | Financial Bid | AOC | Bid Value | Rank |
|---|---|---|---|---|---|---|---|
| 1 | cnet-technologies | Bid Analytics | 1,48,546.04 | L2 | |||
| 2 | cnet-technologies | Bid Analytics | |||||
| 3 | cnet-technologies | Bid Analytics | 1,36,518.33 | L1 |
Work Detail
tender for annual plan-2025-26 improvements to eruvaikkonam sub-centre-project no. 13/26-general civil work - maintenance work 2 50.10.1:steel work in built up g i tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 3 50.10.2:steel work for purlin/single section with g i pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 4 12.50:providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 5 od262914/2025-2026:providing and fixing 150mm dia pvc water gutter semi cercular section including fitting with 32x5mm ms flat supports at 1m interval etc complete 6 50.18.9.18.1:providing and fixing pvc pipes including fixing the pipe with clamps/clips at 1.00 m spacing. this included jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 75 mm dia 6kgf/cm2 - external work- exposed on wall
View Original Notice/Document
Result Documents
Tender Documents
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender
✦ ✦ ✦
Awarded Bidder(s)
1
cnet-technologies
Rank : L1 (Lowest)
Bid Amount :
₹
1,00,00,000
Similar Tenders Results