tender for executive engineer midc it division pune- 1 excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0m) by mechanical means 2 excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means 3 excavation for foundation in hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (lift upto 1.5 m). by mechanical mean 4 providing and laying cement concrete pipe of is 458:2003 np-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete 5 providingandlayingcastin situ/ready mix cement concrete inm-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying/pumping, compacting, rougheningthem if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabledreversibledrumtype mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate(crushedsandvsi grade) without scada 6 providing and laying in situ /ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. work in foundations like raft, strip foundations, grillage and footings of r.c.c. columns and steel stanchions etc. includingbailingoutwater, steel centering formwork, laying/pumpingcoverblocks, compaction and curing roughening the surface if special finishis to be provided (excluding reinforcement and structural steel) etc. complete,withfullyautomatic micro processor based plc with scada enabled reversibledrumtypemixer/ concretebatchmixplant(pan mixer) etc. complete. with fineaggregate(crushedsand vsi grade) without scada 7 providing and fixing in positiontmt- fe- 500bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis copings,fins,archesetc.as per detailed designs, drawings and schedules. including cutting, bending, hookingthebars,bindingwith wires or tack welding and supporting as required complete. 8 providing and laying rough shahabad stone flooring 50mm to 60mm thick and of required width in plain/ diamondpatternonabedof 1:6 c.m. including cement float, striking joints, pointing in cementmortar 1:3 curing and cleaning etc. etc. complete 9 providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, andwatering the surface for two days etc complete. note: for item nos. 15 to 18 prior approval of superintending engineer will be necessary 10 providing and laying weep holes of 100 mm diameter pvc pipes a per drawingfor abutment returns, return walls etc. complete. 11 r.c.c.chamber cover with frame 90cm*45cm heavy duty 225kg 12 basic test of cement: standard consistancy, fineness, specific gravity, settingtime(initial&final), compressive strength, soundness 13 basic test of aggregate: water absorption, specific gravity,impact value, crushing value. 14 basic tes tof aggregate: sieve analysis. 15 fine aggregate: fineness modulus(sieveanalysis),silt & clay content 16 concrete: compressive strengthofc.c.cube(setof 3 cubes). 17 concrete: concrete mix design (with all tests on basic materials) 18 steelbartesting:upto16 mm (set of 3 bars) 19 steel bar testing: above 16 mm (set of 3 bars) (tensile strength, %, elongation, yield stress,weight-per meter, bend / rebend test, proof stress. please enable macros to view boq information