tender for gate construction, toilet construction and other miscellaneous works in the residential park located in front of the district officers residence in sant kabir nagar district, lot 02, 1 laying and jointing pvc pipe. heading 2 earth work excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and 7252.11 lead upto 30 meter and including filling, watering and ramming of excavated earth into thetrenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the engineer incharge up to a distanceof 30 meters from the foundation trenches. (gst shall be paid extra) 3 earth filling excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete(dsr-2.25a)) (gst shall be paid extra) 4 pcc workproviding and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone 188392.726 aggregate 40 mm nominal size) and curing complete, including cost of form- work,in foundation-pwd281 (gst shall be paid extra) 5 rcc workr.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit in the proportion of 1:1.5:3 in foundation excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m-20 si--289 (gst shall be paid extra) 6 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit in theproportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m-20 si-283a. (gst shall be paid extra) 7 as in item no. 4b above but for slabs (using 1:1.5:3 mix concrete) si-284a (gst shall be paid extra) 8 as in item 4b but for the lighter beams i.e. having spans upto 6 m. (using 1:1.5:3 mix concrete) (gst shall be paid extra) 9 steelsteel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete dsr-5.22.6 thermo-mechanically treated bars of grade fe-500d or more (gst shall be paid extra) 10 brick workbrick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in(dsr-6.4 cement mortar 1:4 (1 cement : 4 coarse sand)(dsr-6.4.1) (gst shall be paid extra) 11 dpc layer damp proof course 2.5 cm thick and cement concrete consisting of 1 part cement and 1.5 parts approved coarse sand and 3 parts approved 13mm (1/2) graded stone grit and including water proofing materials as ordered by the engineer in charge in the proportin as specified by the manufacturers.pwd-361. (gst shall be paid extra) 12 plaster work20 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) (dsr- : 13.3.1) (gst shall be paid extra) 13 12mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand of 2.25 f.m. over brick work minimum thickness not be less than 10mm including supply of all materials, labour and tap etc. required for the proper completion of the work. (including racking & washing surface) (s.i.no-584) (gst shall be paid extra) 14 door /windowtwo track two panels sliding door with aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with ss 304 body. using r3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (74 mm & above). (height upto 2.5 metre). (gst shall be paid extra) 15 second classteakwood wrouht framed and fixed including simple moulding , straight works as is chaukhats including supply of all material,lobour and t&p etc (dsr-9.1.1)(gst shall be paid extra) 16 supply and fixing of flush doors commercial quality conforming to i.s. 2202 part i(1983) including fixing of wooden cleats and stoppers and illuding fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally.35 mm thik (sor 470)(gst shall be paid extra) 17 providing & fixing1.00mm thick decorative high pressure laminated sheet of plain/ wood grain in glass/ matt /suede finish with high density protective surface layer and reverse sode of adhesive bonding quantity conforming to is: 2046 type s, including cost of adhesive of approved quality. (sor-9.127)(gst shall be paid extra) 18 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete(dsr-: 9.97.1)size 300x10 mm(gst shall be paid extra) 19 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.(dsr- 9.100.1) size 125 mm (gst shall be paid extra) 20 tiling providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. size of tile 60x60 cm dsr11.41.2 (gst shall be paid extra) 21 painting providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. size of tile 60x60 cm dsr11.41.2 interior wall (gst shall be paid extra) 22 colour washing such as even shade :new work (two or more coats) with a base coat of whiting(dsr-13.39.2)(gst shall be paid extra) 23 finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm 9dsr-: 13.48.1 ) (gst shall be paid extra) 24 plumbingproviding and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc.(d.s.r. no-18.8. ) 25 mm nominal dia pipes (d.s.r. no-18.8.3 ) (gst shall be paid extra) 25 32 mm nominal dia pipes (d.s.r. no-18.8.4 ) (gst shall be paid extra) 26 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. 100 mm nominal dia pipes (d.s.r. no-18.9.9) (gst shall be paid extra) 27 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(dsr-17.1 ) (gst shall be paid extra) 28 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps (d.s.r. no-17.7.1 ) (gst shall be paid extra) 29 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (d.s.r. no-18.48 )(gst shall be paid extra) 30 providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : rectangular shape 1500x450 mm (d.s.r. no-17.32.4 )(gst shall be paid extra) 31 providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :range of two urinal basins with 5 litre white p.v.c. automatic flushing cistern(dsr 17.4.2) (gst shall be paid extra) 32 pvc pipe 110 mm dia @6 kgf (sor- p no.7 extra item no 31)(gst shall be paid extra) 33 pvc pipe 75 mm dia @6 kgf(sor- p no.7 extra item no 33)(gst shall be paid extra) 34 providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 :15 mm nominal bore( dsr 18.49.1) (gst shall be paid extra) 35 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931. 15 mm nominal bore(dsr 18.51.1)(gst shall be paid extra) 36 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931.15 mm nominal bore (dsr- 18.52.1) (gst shall be paid extra) 37 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15mm nominal bore (dsr 18.53.1) (gst shall be paid extra) 38 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer - in - charge.(dsr 17.16a)(gst shall be paid extra) 39 s/f of tap , hand spray , extension pipe with all fitting at site including m(gst shall be paid extra) 40 s/f of cpvc pipe of 32mm dia for irrigation system as per direction-in-charge.(gst shall be paid extra)