tender for purchase of 58.5 kva diesel generator , 58.5 kva diesel generator , engine specifications: parameter specification rated output (kw) 54.4 rated output (hp) 74 no. of cylinders 4 cubic capacity (ltrs) 3.24 bore x stroke (mm) 96 x 112 rated speed (rpm) 1500 aspiration turbocharged with aftercooler (ta) lube oil change period (hrs) 500 lube oil sump capacity (ltrs) 10 coolant capacity (ltrs) 12.7 alternator specifications: parameter specification: insulation class class h efficiency (at 100% load, 0.8 pf) 90.8% max voltage dip at full load (0.8 providing fixing lag) 20% max time to build rated voltage 2 sec (at rated speed) frequency 50 hz power factor 0.8 lagging voltage 415 v (3 phase) governing class (iso 8528 part-v) g2 starting system 12v dc battery start genset specifications parameter specification genset rating (kva) (as per iso8528) 58.5 prime power (kw) 46.8 fuel tank capacity (ltrs) 165 noise level @ 1m (with canopy) 75 dba cooling system water cooled speed regulation ±1% additional requirement: installation requirementp: • the offer shall include complete installation of the dg set at the designated location.. • the scope of installation shall cover: • electrical wiring, termination, and commissioning. • laying of power cable between the dg installation point and the main power distribution panel. • civil construction works, including foundation, vibration pads, and any structural support required for proper installation. • all installation work shall comply with cpcb iv+ norms, ceig/electrical inspectorate requirements, and standard safety guidelines. key features • complies with cpcb iv+ emission and noise regulations. • 500-hour lube oil change interval for reduced maintenance construction • inbuilt silencer and compact canopy for reduced noise and better aesthetics. • microprocessor-based control panel with lcd display and diagnostic capability. • remote monitoring compatibility for real-time tracking of parameters. • optimized fuel efficiency across 50-100% loading range. • rugged and compact design suitable for continuous prime power applications. note: bidders must upload the oem-issued technical specification data sheet while participating in the tender.