tender for establish work sheed on filling windows and painting work in computer room district court campus in bulandshahr - 12 mm. thick plaster with cement and coarse sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1 cm. including all type of taxes,octroi, toll taxes,labour cess ,cost of all material,labour t&p etc required for proper completion of work as per direction of e/i.but excluding gst.as per dsr item no. 14.1.2 2 removing white or colour wash by scrapping,sand papering & preparing the surface smooth including necessary repairs to scratches etc.including all type of taxes,octroi, toll taxes,labour cess ,cost of all material, labour t&p etc required for proper completion of work as per direction of e/i.but excluding gst..as per dsr13.88 3 providind wall putty or old surface with approved quality material of berger/j.k./birla or similar make two coats .including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour t&p etc required for proper completion of work as per direction of e/i.but excluding gst.as perdsr item no. 13.80 4 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand & manufacturer including applying additional coats wherever required to achieve even shade & colour old surface.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour t&p etc required for proper completion of work as per direction of e/i.but excluding gstas per dsr 13.81 5 finishing walls with acrylic smooth exterior paint of required shade new work (two or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior primer applied @ 2.20 kg/10 sqm.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour t&p etc required for proper completion of work as per direction of e/i.but excluding gstas per dsr 13.111.1 6 providing & fixing anodised aluminium grill (anodised transparent or dyed to required shade according to 1s:1868 with minimum anodic coating of grade ac 15) of approved design/pattern, with approved standard section & fixed to the existing window frame with c.p. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing & operation of handles & fixing approved anodised aluminium standard section around the opening,all complete as per requirement & direction of engineer-in-charge.(only weight of grill to be measured for payment). including all type of taxes,octroi, toll taxes,labour cess ,cost of all material,labour t&p etc required for proper completion of work as per direction of e/i.but excluding gst.as per dsr 21.17 7 providing & fixing glazing in aluminium door, window, ventilator shutters & partitions etc.with epdm rubber/ neoprene gasket etc. complete as per the architectural drawings & the directions of engineer-in-charge.(cost of aluminium snap beading shall be paid in basic item). including all type of taxes,octroi, toll taxes,labour cess ,cost of all material,labour t&p etc required for proper completion of work as per direction of e/i.but excluding gst.as per dsr 21.3.3 8 providing corrugated g.s. sheet roofing including vertical / curved surfacefixed with polymer coated j or l hooks, bolts & nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins,rafters, trusses& including cutting to size and shape wherever.including all type of taxes,octroi, toll taxes,labour cess ,cost of all material, labour t&p etc required for proper completion of work as per direction of e/i.but excluding gst.as per dsr 12.1.1 9 steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. including all type of taxes,octroi, toll taxes,labour cess ,cost of all material, labour t&p etc required for proper completion of work as per direction of e/i.but excluding gst..as per dsr 10.16.1 10 providing & fixing factory made cabinet shutter/partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (single extruded) having density 600 kg/cum and laminated on both side by laminate sheet/pvc foil lamination.the exposed edges shall be sealed with pvc edge beading of same shade & colour.the shutter shall be fire retardent having necessary screw holding capacity.shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of engineer-in-charge including all type of taxes,octroi, toll taxes,labour cess ,cost of all material,labour t&p etc required for proper completion of work as per direction of e/i.but excluding gst..as per dsr 26.10 11 providing and fixing concealed hinge of approved quality for 19-20 mm thick door with stainless steel screws completeincluding all type of taxes,octroi, toll taxes,labour cess ,cost of all material,labour t&p etc required for proper completion of work as per direction of e/i.but excluding gst.:as per dsr 26.11 12 6mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of engineer-in-charge. including all type of taxes,octroi, toll taxes,labour cess ,cost of all material,labour t&p etc required for proper completion of work as per direction of e/i.but excluding gst.as per dsr 13.86 13 providing & laying app (atactic polypropylene polymer) modified prefabricated five layer,3 mm thick water proofing membrane,black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°c,0.87-0.89 kg/litre & viscocity 70 - 160 cps.over the primer coat the layer of membrane shall be laid using butane torch & sealing all joints etc.& preparing the surface complete. the vital physical & chemical 5 parameters of the membrane shall be as under: joint strength in longitudinal & transverse direction at 23°c as 350/300 n/5 cm.tear strength in longitudinal & transverse direction as 60/80n. softening point of membrane not less than 150°c.cold flexibility shall be upto -2°c when tested in accordance with astm,d-5147.the laying of membrane shall be got done through the authorise dapplicator of the manufacturer of membrane .including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour t&p etc required for proper completion of work as per direction of e/i.but excluding gstdsr no.14.88