tender for providing and applying tack coat with bitumen using bitumen pressure distributor at the rate of 0.30 kg per sqm with bitumen v.g.-10 on the prepared bituminous surface cleaned with mechanical broom.. including all taxes but excluding gst , providing and laying dense graded bituminous macadam with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder vg-30 @ 4.50 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 507 complete in all respects. including all taxes but excluding gst , providing and laying bituminous concrete with 100-120 tph batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with v.g.-30 bituminous binder @ 5.2 to 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 509 complete in all respects..including all taxes but excluding gst , providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectrorising glass beeds @ 250gms per sqm. area, thiclness of 2.5mm is exclusive of surface applied glass beeds as per irc:35. the finish surface to be lavel, uniform and free from streaks and holes. composition of thermoplastic meterial shall be as per table 800-3 of clause 803 of morth including cost of all meterial, labour, t&p etc. require for proper completion of work as direction by engineer-in-charge..including all taxes but excluding