tender for provision of led signage board and light work for newly contructed gateat sarai kale khan cremation ground under central zone mcd; 1 earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 2 providing and laying earth connection from earth electrode with 6 swg dia g.i. wire in 15 mm dia g.i. pipe from earth electrode including connection with g.i. thimble excavation and re-filling as required 3 laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. up to 35 sqmm 4 laying of one number pvc insulated and pvc sheathed/ xlpe power cable of 1.1 kv grade of following size in the existing rcc/hume/metal pipe as required. up to 35 sqmm 5 supplying and fixing of light class gi pipe of 50 mm dia (nominal) 3 meters length along the pole for protection of under ground cable as required. 6 s/l of following size dwc hdpe pipe isi marked along with all accessories like socket ,bend ,couplers etc.conforming to is 14930 ,part ii complete with fitting and cutting ,jointing etc .direct in ground (75 cm below ground level )including excavation and refilling the trench but excluding sand cushioning and protective covering etc, complete as required (a)63mm dia (od-63mm id -51mm nominal ). 7 supply of xlpe insulated pvc sheathed al. conductor un- armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm 8 sitc of 3mm (min) acp sheet based acrylic raised letters led board with 1 x 1 ms square pipe box type frame ,pipe frame all open sides covered by gi sheet properly. 9 sitc of 50 mm x 50 mm x 6mm angle iron mounting stand for acp sign board and painting with primer and finished paint as required. 10 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) 11 led down lighter (cob type) (system lumen efficacy ≥120 lm/watt ) supplying, installation, testing & commissioning of led recessed / surface down lighter (round / square/ rectangular) cob type of following body material and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140- 270 volt, freq 50/60 hz, operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% , p. f.≥0.95, ip20, cri >80 , ugr (unified glare rating) < 19, flicker free (flicker should be below 5 %), life time (led,driver & electrical circuitry), life time of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin), sdcm(standard deviation color matching) 12 -15 watt 12 supply installation testing and commisioning of 9w/12w led bush/spike light (with mounting pipe) with dia cast aluminium housing with toughened glass suitable for ground mounting enclosed with glass cover in frame, mounting bracket provided for ground aiming the object, high ingress protection against dust & moisture, corrosion resistant coated and ip- 65/66 protection as required. (a) lumen efficacy >90 lm/watt. (b) pf>.95 (c) rated voltage 220-240 vac 50hz. 13 led batten light (system lumen efficacy ≥105 <120 lm/watt)supplying, installation, testing & commissioning of led surface mountedbatten light of following body material and construction as per is : 10322with driver (replaceable) as per the requirement with driver efficiency>85% ,operating voltage ac 140-270 volt, freq 50/60 hz, operating temprange -15 deg to 40 deg centigrade, internal surge protection of 2.5 kv withshort & open circuit protection ,thd < 10% , p. f.≥0.95, ip20, cri >80,flicker free, (flicker should be below 5 %), life time (led,driver & electricalcircuitary), of minimum 50000 burning hours with , 70% of initiallumen maintained till life ends, cct 3000°k / 4000°k / 5700°k/6000°k/6500°k (as per ansi bin), sdcm(standard deviation colormatching) <3, maximum power consumption should not more than thespecified rating and fixture shall be of relevant bis standard and trademark certificate ( t.c.). manufactures word mark/ name engraved/embossing/ screen printing on housing. complete in all respect i/cconnections with 1.5 sq mm frls, pvc insulated copper conductorsingle core cable and earthing etc. as required with minimum 5 year oemwarranty. system lumen efficacy ≥105 <120 lm/watt output . lm79 & lm80test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved byengineer-in-charge as per requirement. (thermal management: heat sinkof aluminum housing such that led junction temperature shall not riseabove 90°c). crca sheet body (thickness ≥ 0.50 mm)18- 22 watt 14 supply, installation, testing and commissioning of led rgb/rgbw linear wall washer luminaire for facade lighting with aluminium extruded housing, of following wattage. luminaire shall be capable of producing dynamic color changing light with 16 million colors by dmx/ethernet based control. the beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 v ac, 50 hz, power factor > 0.9 . fixture shall be suitable to operate at ambient temperature range of -10°c to +50°c and shall be ip 65 and ik06 rated. lifetime should be at least l70:50000 burning hours at 50°c. luminaire shall be conforming to bis and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. 25 w 15 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required.3 x 2.5 sq. mm 16 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 20 mm